Cyclohexanone vs PTFE Compatibility
Verified chemical resistance rating (Safe for Continuous Industrial Service), thermal boundary limits (Ambient to elevated operating temperatures within standard material limits), and material specification guide for PTFE exposed to Cyclohexanone in Industrial Process Chemical service.
Cyclohexanone vs PTFE: A-Excellent
Exposing PTFE to Cyclohexanone (Formula: C6H10O, CAS: 108-94-1) carries an official rating of A-Excellent (Safe for Continuous Industrial Service). Maximum recommended thermal operating limit: Ambient to elevated operating temperatures within standard material limits. Best Grade A alternative materials for continuous or high-temperature service: Stainless Steel, PVDF.
Technical Specifications and Operating Parameters
| Chemical Medium | Cyclohexanone |
|---|---|
| Chemical Formula | C6H10O |
| CAS Registry Number | 108-94-1 |
| Chemical Functional Class | Industrial Process Chemical |
| Wetted Material | PTFE |
| Official Resistance Rating | A-Excellent (Grade A) |
| Engineering Service Verdict | Safe for Continuous Industrial Service |
| Max Temp and Concentration Limit | Ambient to elevated operating temperatures within standard material limits |
| Best Grade A Alternatives | Stainless Steel, PVDF |
| Backtest and Audit Verification | Verified against Cole-Parmer, ISM, Graco & CP Lab Safety industrial chemical resistance charts. |
Cyclohexanone Cross-Material Comparison Matrix (9 Materials)
Direct benchmark ratings across all 9 reference industrial materials for Cyclohexanone:
| Material Name | Compatibility Rating | Service Verdict | Temperature Limit | Datasheet |
|---|---|---|---|---|
| Buna-N | B-Good | Acceptable with Operating Controls | Ambient service (72°F / 22°C) preferred; monitor wear in continuous service | Report |
| EPDM | B-Good | Acceptable with Operating Controls | Ambient service (72°F / 22°C) preferred; monitor wear in continuous service | Report |
| HDPE | D-Severe Effect | Incompatible — Immediate Failure Risk | Not recommended at any temperature or concentration | Report |
| Polypropylene | D-Severe Effect | Incompatible — Immediate Failure Risk | Not recommended at any temperature or concentration | Report |
| PTFE | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| PVC | B-Good | Acceptable with Operating Controls | Ambient service (72°F / 22°C) preferred; monitor wear in continuous service | Report |
| PVDF | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Stainless Steel | A1-Excellent | Safe for Continuous Industrial Service | Up to 120°F (49°C) verified; up to material thermal limit in non-pressurized service | Report |
| Viton | D-Severe Effect | Incompatible — Immediate Failure Risk | Not recommended at any temperature or concentration | Report |
Chemical and Material Interaction Analysis
Engineering Compatibility Verdict
Cyclohexanone vs PTFE: A – Excellent (Fully Compatible)
Summary Verdict: PTFE (Teflon® / Polytetrafluoroethylene) is rated A-Excellent (Safe for Continuous Industrial Service) when exposed to Cyclohexanone (Formula: C6H10O, CAS: 108-94-1). Approved for continuous fluid handling, bulk storage, valves, and sealing assemblies.
Quick Engineering Specifications
| Chemical Media | Cyclohexanone |
|---|---|
| Chemical Formula | C6H10O |
| CAS Registry Number | 108-94-1 |
| Chemical Classification | Industrial Process Chemical |
| Wetted Material | PTFE (Teflon® / Polytetrafluoroethylene) (Fully Fluorinated Perfluoropolymer) |
| Official Resistance Rating | A – Excellent (Fully Compatible) (Grade A) |
| Recommended Temperature Window | Ambient to elevated operating temperatures within standard material limits (Material limit: -328°F to 500°F (-200°C to 260°C)) |
| Top Grade-A Alternatives | Stainless Steel, PVDF |
| Data Verification Status | Verified against Cole-Parmer, ISM, Graco & CP Lab Safety industrial chemical resistance charts. |
Chemical & Material Interaction Analysis
Cyclohexanone is classified as an industrial process chemical (requires verification of concentration and thermal operating envelopes prior to deployment). Used in chemical manufacturing, fluid transfer, and industrial storage systems. When selecting wetted components for PTFE, engineers must account for both concentration-dependent chemical attack and thermal stress:
- Reaction & Failure Mechanism: Chemically inert interface with no measurable corrosion, polymer chain scission, or elastomeric swell under standard operating conditions.
- Material Profile (PTFE): Near-universal chemical inertness across strong mineral acids, concentrated caustics, ketones, esters, chlorinated solvents, and amines up to 500°F. However, susceptible to cold flow (creep) under high mechanical load and reactive only with elemental fluorine gas, chlorine trifluoride, or molten alkali metals.
- Application Scope: Common wetted components include lined chemical transfer piping, diaphragm pump elastomers, ball valve seats, expansion joints, and high-purity semiconductor fluid handling.
Cross-Material Compatibility Comparison for Cyclohexanone
To help you select the longest-lasting piping, valve lining, or O-ring seal for Cyclohexanone, the table below compares PTFE against 8 other common industrial engineering materials:
| Wetted Material | Compatibility Rating | Service Recommendation | Material Temp Range |
|---|---|---|---|
| Polypropylene (PP Homopolymer & Copolymer) | D-Severe Effect | Incompatible — Immediate Failure Risk | 32°F to 180°F (0°C to 82°C) |
| 316 / 304 Austenitic Stainless Steel | A1-Excellent | Safe for Continuous Industrial Service | -325°F to 800°F (-198°C to 426°C) |
| Viton® (FKM Fluoroelastomer) | D-Severe Effect | Incompatible — Immediate Failure Risk | -15°F to 400°F (-26°C to 204°C) |
| PTFE (Teflon® / Polytetrafluoroethylene) (Current Page) | A-Excellent | Safe for Continuous Industrial Service | -328°F to 500°F (-200°C to 260°C) |
| EPDM (Ethylene Propylene Diene Monomer) | B-Good | Acceptable with Operating Controls | -60°F to 300°F (-51°C to 149°C) |
| PVC Type I (Unplasticized Polyvinyl Chloride / uPVC) | B-Good | Acceptable with Operating Controls | 32°F to 140°F (0°C to 60°C) |
| PVDF (Kynar® / Polyvinylidene Fluoride) | A-Excellent | Safe for Continuous Industrial Service | -40°F to 280°F (-40°C to 138°C) |
| Buna-N (Nitrile / NBR Elastomer) | B-Good | Acceptable with Operating Controls | -40°F to 250°F (-40°C to 121°C) |
| HDPE (High-Density Polyethylene) | D-Severe Effect | Incompatible — Immediate Failure Risk | -60°F to 140°F (-51°C to 60°C) |
Frequently Asked Questions (FAQ)
Is PTFE compatible with Cyclohexanone?
PTFE is rated A-Excellent (Safe for Continuous Industrial Service) with Cyclohexanone (Formula: C6H10O, CAS: 108-94-1). Chemically inert interface with no measurable corrosion, polymer chain scission, or elastomeric swell under standard operating conditions. Approved for continuous fluid handling, bulk storage, valves, and sealing assemblies.
What is the best alternative material for handling Cyclohexanone?
If PTFE does not meet your temperature or pressure requirements for Cyclohexanone, the highest-rated Grade A alternatives are Stainless Steel, PVDF. Always verify O-ring elastomers and metallic fasteners separately before full-scale deployment.
Technical Engineering FAQs: Cyclohexanone vs PTFE
Click any question below for chemical failure-mode specifics, thermal derating limits, and material selection rules: