Dichlorobenzene vs EPDM Compatibility
Verified chemical resistance rating (Incompatible — Immediate Failure Risk), thermal boundary limits (Not recommended at any temperature or concentration), and material specification guide for EPDM exposed to Dichlorobenzene in Halogenated Hydrocarbon / Refrigerant service.
Dichlorobenzene vs EPDM: D-Severe Effect
Exposing EPDM to Dichlorobenzene (Formula: C6H4Cl2 (1,2- / 1,4-Dichlorobenzene), CAS: 95-50-1) carries an official rating of D-Severe Effect (Incompatible — Immediate Failure Risk). Maximum recommended thermal operating limit: Not recommended at any temperature or concentration. Best Grade A alternative materials for continuous or high-temperature service: Stainless Steel, PTFE, PVDF.
Technical Specifications and Operating Parameters
| Chemical Medium | Dichlorobenzene |
|---|---|
| Chemical Formula | C6H4Cl2 (1,2- / 1,4-Dichlorobenzene) |
| CAS Registry Number | 95-50-1 |
| Chemical Functional Class | Halogenated Hydrocarbon / Refrigerant |
| Wetted Material | EPDM |
| Official Resistance Rating | D-Severe Effect (Grade D) |
| Engineering Service Verdict | Incompatible — Immediate Failure Risk |
| Max Temp and Concentration Limit | Not recommended at any temperature or concentration |
| Best Grade A Alternatives | Stainless Steel, PTFE, PVDF |
| Backtest and Audit Verification | Verified against Cole-Parmer, ISM, Graco & CP Lab Safety industrial chemical resistance charts. |
Dichlorobenzene Cross-Material Comparison Matrix (9 Materials)
Direct benchmark ratings across all 9 reference industrial materials for Dichlorobenzene:
| Material Name | Compatibility Rating | Service Verdict | Temperature Limit | Datasheet |
|---|---|---|---|---|
| Buna-N | D-Severe Effect | Incompatible — Immediate Failure Risk | Not recommended at any temperature or concentration | Report |
| EPDM | D-Severe Effect | Incompatible — Immediate Failure Risk | Not recommended at any temperature or concentration | Report |
| HDPE | C1-Fair | Caution: Short-Term or Emergency Use Only | Short-term exposure only; avoid continuous pressurized service | Report |
| Polypropylene | C1-Fair | Caution: Short-Term or Emergency Use Only | Short-term exposure only; avoid continuous pressurized service | Report |
| PTFE | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| PVC | D-Severe Effect | Incompatible — Immediate Failure Risk | Not recommended at any temperature or concentration | Report |
| PVDF | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Stainless Steel | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Viton | C-Fair | Caution: Limited / Intermittent Service Only | Ambient intermittent contact only; do not pressurize | Report |
Chemical and Material Interaction Analysis
Engineering Compatibility Verdict
Dichlorobenzene vs EPDM: D – Severe Effect (Do Not Use)
Summary Verdict: EPDM (Ethylene Propylene Diene Monomer) is rated D-Severe Effect (Incompatible — Immediate Failure Risk) when exposed to Dichlorobenzene (Formula: C6H4Cl2 (1,2- / 1,4-Dichlorobenzene), CAS: 95-50-1). PROHIBITED for wetted service. Immediately substitute with an A-rated material shown in the cross-material comparison table below.
Quick Engineering Specifications
| Chemical Media | Dichlorobenzene |
|---|---|
| Chemical Formula | C6H4Cl2 (1,2- / 1,4-Dichlorobenzene) |
| CAS Registry Number | 95-50-1 |
| Chemical Classification | Halogenated Hydrocarbon / Refrigerant |
| Wetted Material | EPDM (Ethylene Propylene Diene Monomer) (Synthetic Polar-Service Elastomer) |
| Official Resistance Rating | D – Severe Effect (Do Not Use) (Grade D) |
| Recommended Temperature Window | Not recommended at any temperature or concentration (Material limit: -60°F to 300°F (-51°C to 149°C)) |
| Top Grade-A Alternatives | Stainless Steel, PTFE, PVDF |
| Data Verification Status | Verified against Cole-Parmer, ISM, Graco & CP Lab Safety industrial chemical resistance charts. |
Chemical & Material Interaction Analysis
Dichlorobenzene is classified as a halogenated hydrocarbon / refrigerant (high diffusivity and strong non-polar solvent swelling in polyolefins and standard rubbers). Used in vapor degreasing, refrigerant loops, chemical extraction, and polymer manufacturing. When selecting wetted components for EPDM, engineers must account for both concentration-dependent chemical attack and thermal stress:
- Reaction & Failure Mechanism: Causes rapid, catastrophic material failure—including severe dissolution, stress cracking, extreme volumetric blowout (>25% swell), or rapid pitting corrosion (>50 mpy).
- Material Profile (EPDM): Outstanding resistance to polar fluids including ketones (acetone, MEK), alcohols, glycols, phosphate ester hydraulic fluids (Skydrol), alkalis, and dilute acids. However, exhibits rapid, catastrophic volumetric swelling and softening when exposed to petroleum oils, gasoline, diesel, kerosene, aliphatic/aromatic hydrocarbons, and chlorinated solvents.
- Application Scope: Common wetted components include butterfly valve liners, O-rings, sanitary Tri-Clamp gaskets, caustic dosing hoses, and water/wastewater treatment seals.
Cross-Material Compatibility Comparison for Dichlorobenzene
To help you select the longest-lasting piping, valve lining, or O-ring seal for Dichlorobenzene, the table below compares EPDM against 8 other common industrial engineering materials:
| Wetted Material | Compatibility Rating | Service Recommendation | Material Temp Range |
|---|---|---|---|
| Polypropylene (PP Homopolymer & Copolymer) | C1-Fair | Caution: Short-Term or Emergency Use Only | 32°F to 180°F (0°C to 82°C) |
| 316 / 304 Austenitic Stainless Steel | A-Excellent | Safe for Continuous Industrial Service | -325°F to 800°F (-198°C to 426°C) |
| Viton® (FKM Fluoroelastomer) | C-Fair | Caution: Limited / Intermittent Service Only | -15°F to 400°F (-26°C to 204°C) |
| PTFE (Teflon® / Polytetrafluoroethylene) | A-Excellent | Safe for Continuous Industrial Service | -328°F to 500°F (-200°C to 260°C) |
| EPDM (Ethylene Propylene Diene Monomer) (Current Page) | D-Severe Effect | Incompatible — Immediate Failure Risk | -60°F to 300°F (-51°C to 149°C) |
| PVC Type I (Unplasticized Polyvinyl Chloride / uPVC) | D-Severe Effect | Incompatible — Immediate Failure Risk | 32°F to 140°F (0°C to 60°C) |
| PVDF (Kynar® / Polyvinylidene Fluoride) | A-Excellent | Safe for Continuous Industrial Service | -40°F to 280°F (-40°C to 138°C) |
| Buna-N (Nitrile / NBR Elastomer) | D-Severe Effect | Incompatible — Immediate Failure Risk | -40°F to 250°F (-40°C to 121°C) |
| HDPE (High-Density Polyethylene) | C1-Fair | Caution: Short-Term or Emergency Use Only | -60°F to 140°F (-51°C to 60°C) |
Frequently Asked Questions (FAQ)
Is EPDM compatible with Dichlorobenzene?
EPDM is rated D-Severe Effect (Incompatible — Immediate Failure Risk) with Dichlorobenzene (Formula: C6H4Cl2 (1,2- / 1,4-Dichlorobenzene), CAS: 95-50-1). Causes rapid, catastrophic material failure—including severe dissolution, stress cracking, extreme volumetric blowout (>25% swell), or rapid pitting corrosion (>50 mpy). PROHIBITED for wetted service. Immediately substitute with an A-rated material shown in the cross-material comparison table below.
What is the best alternative material for handling Dichlorobenzene?
If EPDM does not meet your temperature or pressure requirements for Dichlorobenzene, the highest-rated Grade A alternatives are Stainless Steel, PTFE, PVDF. Always verify O-ring elastomers and metallic fasteners separately before full-scale deployment.
Technical Engineering FAQs: Dichlorobenzene vs EPDM
Click any question below for chemical failure-mode specifics, thermal derating limits, and material selection rules: