Hexane vs Viton Compatibility
Verified chemical resistance rating (Safe for Continuous Industrial Service), thermal boundary limits (Ambient to elevated operating temperatures within standard material limits), and material specification guide for Viton exposed to Hexane in Aliphatic Hydrocarbon / Fuel / Industrial Oil service.
Hexane vs Viton: A-Excellent
Exposing Viton to Hexane (Formula: C6H14 (n-Hexane), CAS: 110-54-3) carries an official rating of A-Excellent (Safe for Continuous Industrial Service). Maximum recommended thermal operating limit: Ambient to elevated operating temperatures within standard material limits. Best Grade A alternative materials for continuous or high-temperature service: Stainless Steel, PTFE, PVDF, Buna-N.
Technical Specifications and Operating Parameters
| Chemical Medium | Hexane |
|---|---|
| Chemical Formula | C6H14 (n-Hexane) |
| CAS Registry Number | 110-54-3 |
| Chemical Functional Class | Aliphatic Hydrocarbon / Fuel / Industrial Oil |
| Wetted Material | Viton |
| Official Resistance Rating | A-Excellent (Grade A) |
| Engineering Service Verdict | Safe for Continuous Industrial Service |
| Max Temp and Concentration Limit | Ambient to elevated operating temperatures within standard material limits |
| Best Grade A Alternatives | Stainless Steel, PTFE, PVDF, Buna-N |
| Backtest and Audit Verification | Verified against Cole-Parmer, ISM & Graco industrial chemical resistance charts. |
Hexane Cross-Material Comparison Matrix (9 Materials)
Direct benchmark ratings across all 9 reference industrial materials for Hexane:
| Material Name | Compatibility Rating | Service Verdict | Temperature Limit | Datasheet |
|---|---|---|---|---|
| Buna-N | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| EPDM | D-Severe Effect | Incompatible — Immediate Failure Risk | Not recommended at any temperature or concentration | Report |
| HDPE | B-Good | Acceptable with Operating Controls | Ambient service (72°F / 22°C) preferred; monitor wear in continuous service | Report |
| Polypropylene | B1-Good | Acceptable with Routine Inspection | Up to 120°F (49°C) with minor absorption/corrosion allowance | Report |
| PTFE | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| PVC | B-Good | Acceptable with Operating Controls | Ambient service (72°F / 22°C) preferred; monitor wear in continuous service | Report |
| PVDF | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Stainless Steel | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Viton | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
Chemical and Material Interaction Analysis
Engineering Compatibility Verdict
Hexane vs Viton: A – Excellent (Fully Compatible)
Summary Verdict: Viton® (FKM Fluoroelastomer) is rated A-Excellent (Safe for Continuous Industrial Service) when exposed to Hexane (Formula: C6H14 (n-Hexane), CAS: 110-54-3). Approved for continuous fluid handling, bulk storage, valves, and sealing assemblies.
Quick Engineering Specifications
| Chemical Media | Hexane |
|---|---|
| Chemical Formula | C6H14 (n-Hexane) |
| CAS Registry Number | 110-54-3 |
| Chemical Classification | Aliphatic Hydrocarbon / Fuel / Industrial Oil |
| Wetted Material | Viton® (FKM Fluoroelastomer) (High-Performance Fluorinated Elastomer) |
| Official Resistance Rating | A – Excellent (Fully Compatible) (Grade A) |
| Recommended Temperature Window | Ambient to elevated operating temperatures within standard material limits (Material limit: -15°F to 400°F (-26°C to 204°C)) |
| Top Grade-A Alternatives | Stainless Steel, PTFE, PVDF, Buna-N |
| Data Verification Status | Verified against Cole-Parmer, ISM & Graco industrial chemical resistance charts. |
Chemical & Material Interaction Analysis
Hexane is classified as an aliphatic hydrocarbon / fuel / industrial oil (hydrocarbon permeation and softening in non-oil-resistant polymers and EPDM rubbers). Used in fuel transfer lines, hydraulic power units, lubrication systems, and petrochemical storage. When selecting wetted components for Viton, engineers must account for both concentration-dependent chemical attack and thermal stress:
- Reaction & Failure Mechanism: Chemically inert interface with no measurable corrosion, polymer chain scission, or elastomeric swell under standard operating conditions.
- Material Profile (Viton): Exceptional resistance to aliphatic and aromatic hydrocarbons, petroleum oils, concentrated mineral acids, and halogenated solvents at elevated temperatures. However, severely attacked by polar oxygenated solvents (acetone, MEK, ethyl acetate, THF), anhydrous ammonia, primary amines, and hot concentrated caustic soda via dehydrofluorination.
- Application Scope: Common wetted components include O-ring static/dynamic seals, pump diaphragms, valve seats, flange gaskets, and chemical transfer hose liners.
Cross-Material Compatibility Comparison for Hexane
To help you select the longest-lasting piping, valve lining, or O-ring seal for Hexane, the table below compares Viton against 8 other common industrial engineering materials:
| Wetted Material | Compatibility Rating | Service Recommendation | Material Temp Range |
|---|---|---|---|
| Polypropylene (PP Homopolymer & Copolymer) | B1-Good | Acceptable with Routine Inspection | 32°F to 180°F (0°C to 82°C) |
| 316 / 304 Austenitic Stainless Steel | A-Excellent | Safe for Continuous Industrial Service | -325°F to 800°F (-198°C to 426°C) |
| Viton® (FKM Fluoroelastomer) (Current Page) | A-Excellent | Safe for Continuous Industrial Service | -15°F to 400°F (-26°C to 204°C) |
| PTFE (Teflon® / Polytetrafluoroethylene) | A-Excellent | Safe for Continuous Industrial Service | -328°F to 500°F (-200°C to 260°C) |
| EPDM (Ethylene Propylene Diene Monomer) | D-Severe Effect | Incompatible — Immediate Failure Risk | -60°F to 300°F (-51°C to 149°C) |
| PVC Type I (Unplasticized Polyvinyl Chloride / uPVC) | B-Good | Acceptable with Operating Controls | 32°F to 140°F (0°C to 60°C) |
| PVDF (Kynar® / Polyvinylidene Fluoride) | A-Excellent | Safe for Continuous Industrial Service | -40°F to 280°F (-40°C to 138°C) |
| Buna-N (Nitrile / NBR Elastomer) | A-Excellent | Safe for Continuous Industrial Service | -40°F to 250°F (-40°C to 121°C) |
| HDPE (High-Density Polyethylene) | B-Good | Acceptable with Operating Controls | -60°F to 140°F (-51°C to 60°C) |
Frequently Asked Questions (FAQ)
Is Viton compatible with Hexane?
Viton is rated A-Excellent (Safe for Continuous Industrial Service) with Hexane (Formula: C6H14 (n-Hexane), CAS: 110-54-3). Chemically inert interface with no measurable corrosion, polymer chain scission, or elastomeric swell under standard operating conditions. Approved for continuous fluid handling, bulk storage, valves, and sealing assemblies.
What is the best alternative material for handling Hexane?
If Viton does not meet your temperature or pressure requirements for Hexane, the highest-rated Grade A alternatives are Stainless Steel, PTFE, PVDF, Buna-N. Always verify O-ring elastomers and metallic fasteners separately before full-scale deployment.
Technical Engineering FAQs: Hexane vs Viton
Click any question below for chemical failure-mode specifics, thermal derating limits, and material selection rules: