Tricresylphosphate vs Viton Compatibility
Verified chemical resistance rating (Safe for Continuous Ambient Service), thermal boundary limits (Verified up to 72°F (22°C); conduct thermal de-rating above 100°F (38°C)), and material specification guide for Viton exposed to Tricresylphosphate in Industrial Process Chemical service.
Tricresylphosphate vs Viton: A2-Excellent
Exposing Viton to Tricresylphosphate (Formula: (CH3C6H4O)3PO (C21H21O4P / TCP), CAS: 1330-78-5) carries an official rating of A2-Excellent (Safe for Continuous Ambient Service). Maximum recommended thermal operating limit: Verified up to 72°F (22°C); conduct thermal de-rating above 100°F (38°C). Best Grade A alternative materials for continuous or high-temperature service: Polypropylene, PTFE, EPDM, PVDF.
Technical Specifications and Operating Parameters
| Chemical Medium | Tricresylphosphate |
|---|---|
| Chemical Formula | (CH3C6H4O)3PO (C21H21O4P / TCP) |
| CAS Registry Number | 1330-78-5 |
| Chemical Functional Class | Industrial Process Chemical |
| Wetted Material | Viton |
| Official Resistance Rating | A2-Excellent (Grade A) |
| Engineering Service Verdict | Safe for Continuous Ambient Service |
| Max Temp and Concentration Limit | Verified up to 72°F (22°C); conduct thermal de-rating above 100°F (38°C) |
| Best Grade A Alternatives | Polypropylene, PTFE, EPDM, PVDF |
| Backtest and Audit Verification | Verified against Cole-Parmer, ISM & Graco industrial chemical resistance charts. |
Tricresylphosphate Cross-Material Comparison Matrix (9 Materials)
Direct benchmark ratings across all 9 reference industrial materials for Tricresylphosphate:
| Material Name | Compatibility Rating | Service Verdict | Temperature Limit | Datasheet |
|---|---|---|---|---|
| Buna-N | B-Good | Acceptable with Operating Controls | Ambient service (72°F / 22°C) preferred; monitor wear in continuous service | Report |
| EPDM | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| HDPE | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Polypropylene | A1-Excellent | Safe for Continuous Industrial Service | Up to 120°F (49°C) verified; up to material thermal limit in non-pressurized service | Report |
| PTFE | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| PVC | B-Good | Acceptable with Operating Controls | Ambient service (72°F / 22°C) preferred; monitor wear in continuous service | Report |
| PVDF | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Stainless Steel | B-Good | Acceptable with Operating Controls | Ambient service (72°F / 22°C) preferred; monitor wear in continuous service | Report |
| Viton | A2-Excellent | Safe for Continuous Ambient Service | Verified up to 72°F (22°C); conduct thermal de-rating above 100°F (38°C) | Report |
Chemical and Material Interaction Analysis
Engineering Compatibility Verdict
Tricresylphosphate vs Viton: A2 – Excellent (No Effect up to 72°F / 22°C)
Summary Verdict: Viton® (FKM Fluoroelastomer) is rated A2-Excellent (Safe for Continuous Ambient Service) when exposed to Tricresylphosphate (Formula: (CH3C6H4O)3PO (C21H21O4P / TCP), CAS: 1330-78-5). Recommended for ambient storage tanks, transfer lines, and seals. If process temperatures exceed 100°F (38°C), verify pressure de-rating factors.
Quick Engineering Specifications
| Chemical Media | Tricresylphosphate |
|---|---|
| Chemical Formula | (CH3C6H4O)3PO (C21H21O4P / TCP) |
| CAS Registry Number | 1330-78-5 |
| Chemical Classification | Industrial Process Chemical |
| Wetted Material | Viton® (FKM Fluoroelastomer) (High-Performance Fluorinated Elastomer) |
| Official Resistance Rating | A2 – Excellent (No Effect up to 72°F / 22°C) (Grade A) |
| Recommended Temperature Window | Verified up to 72°F (22°C); conduct thermal de-rating above 100°F (38°C) (Material limit: -15°F to 400°F (-26°C to 204°C)) |
| Top Grade-A Alternatives | Polypropylene, PTFE, EPDM, PVDF |
| Data Verification Status | Verified against Cole-Parmer, ISM & Graco industrial chemical resistance charts. |
Chemical & Material Interaction Analysis
Tricresylphosphate is classified as an industrial process chemical (requires verification of concentration and thermal operating envelopes prior to deployment). Used in chemical manufacturing, fluid transfer, and industrial storage systems. When selecting wetted components for Viton, engineers must account for both concentration-dependent chemical attack and thermal stress:
- Reaction & Failure Mechanism: Exhibits no chemical degradation or structural loss at ambient room temperatures (72°F / 22°C), though elevated temperatures may accelerate minor permeation.
- Material Profile (Viton): Exceptional resistance to aliphatic and aromatic hydrocarbons, petroleum oils, concentrated mineral acids, and halogenated solvents at elevated temperatures. However, severely attacked by polar oxygenated solvents (acetone, MEK, ethyl acetate, THF), anhydrous ammonia, primary amines, and hot concentrated caustic soda via dehydrofluorination.
- Application Scope: Common wetted components include O-ring static/dynamic seals, pump diaphragms, valve seats, flange gaskets, and chemical transfer hose liners.
Cross-Material Compatibility Comparison for Tricresylphosphate
To help you select the longest-lasting piping, valve lining, or O-ring seal for Tricresylphosphate, the table below compares Viton against 8 other common industrial engineering materials:
| Wetted Material | Compatibility Rating | Service Recommendation | Material Temp Range |
|---|---|---|---|
| Polypropylene (PP Homopolymer & Copolymer) | A1-Excellent | Safe for Continuous Industrial Service | 32°F to 180°F (0°C to 82°C) |
| 316 / 304 Austenitic Stainless Steel | B-Good | Acceptable with Operating Controls | -325°F to 800°F (-198°C to 426°C) |
| Viton® (FKM Fluoroelastomer) (Current Page) | A2-Excellent | Safe for Continuous Ambient Service | -15°F to 400°F (-26°C to 204°C) |
| PTFE (Teflon® / Polytetrafluoroethylene) | A-Excellent | Safe for Continuous Industrial Service | -328°F to 500°F (-200°C to 260°C) |
| EPDM (Ethylene Propylene Diene Monomer) | A-Excellent | Safe for Continuous Industrial Service | -60°F to 300°F (-51°C to 149°C) |
| PVC Type I (Unplasticized Polyvinyl Chloride / uPVC) | B-Good | Acceptable with Operating Controls | 32°F to 140°F (0°C to 60°C) |
| PVDF (Kynar® / Polyvinylidene Fluoride) | A-Excellent | Safe for Continuous Industrial Service | -40°F to 280°F (-40°C to 138°C) |
| Buna-N (Nitrile / NBR Elastomer) | B-Good | Acceptable with Operating Controls | -40°F to 250°F (-40°C to 121°C) |
| HDPE (High-Density Polyethylene) | A-Excellent | Safe for Continuous Industrial Service | -60°F to 140°F (-51°C to 60°C) |
Frequently Asked Questions (FAQ)
Is Viton compatible with Tricresylphosphate?
Viton is rated A2-Excellent (Safe for Continuous Ambient Service) with Tricresylphosphate (Formula: (CH3C6H4O)3PO (C21H21O4P / TCP), CAS: 1330-78-5). Exhibits no chemical degradation or structural loss at ambient room temperatures (72°F / 22°C), though elevated temperatures may accelerate minor permeation. Recommended for ambient storage tanks, transfer lines, and seals. If process temperatures exceed 100°F (38°C), verify pressure de-rating factors.
What is the best alternative material for handling Tricresylphosphate?
If Viton does not meet your temperature or pressure requirements for Tricresylphosphate, the highest-rated Grade A alternatives are Polypropylene, PTFE, EPDM, PVDF. Always verify O-ring elastomers and metallic fasteners separately before full-scale deployment.
Technical Engineering FAQs: Tricresylphosphate vs Viton
Click any question below for chemical failure-mode specifics, thermal derating limits, and material selection rules: