Carbon Disulfide vs Viton Compatibility
Verified chemical resistance rating (Safe for Continuous Industrial Service), thermal boundary limits (Up to 120°F (49°C) verified; up to material thermal limit in non-pressurized service), and material specification guide for Viton exposed to Carbon Disulfide in Inorganic Salt / Brine / Ionic Solution service.
Carbon Disulfide vs Viton: A1-Excellent
Exposing Viton to Carbon Disulfide (Formula: CS2, CAS: 75-15-0) carries an official rating of A1-Excellent (Safe for Continuous Industrial Service). Maximum recommended thermal operating limit: Up to 120°F (49°C) verified; up to material thermal limit in non-pressurized service. Best Grade A alternative materials for continuous or high-temperature service: Stainless Steel, PTFE, PVDF.
Technical Specifications and Operating Parameters
| Chemical Medium | Carbon Disulfide |
|---|---|
| Chemical Formula | CS2 |
| CAS Registry Number | 75-15-0 |
| Chemical Functional Class | Inorganic Salt / Brine / Ionic Solution |
| Wetted Material | Viton |
| Official Resistance Rating | A1-Excellent (Grade A) |
| Engineering Service Verdict | Safe for Continuous Industrial Service |
| Max Temp and Concentration Limit | Up to 120°F (49°C) verified; up to material thermal limit in non-pressurized service |
| Best Grade A Alternatives | Stainless Steel, PTFE, PVDF |
| Backtest and Audit Verification | Verified against Cole-Parmer, ISM & Graco industrial chemical resistance charts. |
Carbon Disulfide Cross-Material Comparison Matrix (9 Materials)
Direct benchmark ratings across all 9 reference industrial materials for Carbon Disulfide:
| Material Name | Compatibility Rating | Service Verdict | Temperature Limit | Datasheet |
|---|---|---|---|---|
| Buna-N | B-Good | Acceptable with Operating Controls | Ambient service (72°F / 22°C) preferred; monitor wear in continuous service | Report |
| EPDM | D-Severe Effect | Incompatible — Immediate Failure Risk | Not recommended at any temperature or concentration | Report |
| HDPE | D-Severe Effect | Incompatible — Immediate Failure Risk | Not recommended at any temperature or concentration | Report |
| Polypropylene | D-Severe Effect | Incompatible — Immediate Failure Risk | Not recommended at any temperature or concentration | Report |
| PTFE | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| PVC | B-Good | Acceptable with Operating Controls | Ambient service (72°F / 22°C) preferred; monitor wear in continuous service | Report |
| PVDF | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Stainless Steel | A1-Excellent | Safe for Continuous Industrial Service | Up to 120°F (49°C) verified; up to material thermal limit in non-pressurized service | Report |
| Viton | A1-Excellent | Safe for Continuous Industrial Service | Up to 120°F (49°C) verified; up to material thermal limit in non-pressurized service | Report |
Chemical and Material Interaction Analysis
Engineering Compatibility Verdict
Carbon Disulfide vs Viton: A1 – Excellent (No Effect up to 120°F / 49°C)
Summary Verdict: Viton® (FKM Fluoroelastomer) is rated A1-Excellent (Safe for Continuous Industrial Service) when exposed to Carbon Disulfide (Formula: CS2, CAS: 75-15-0). Approved for primary wetted components including continuous-duty piping, bulk storage tanks, pump manifolds, and static/dynamic seals.
Quick Engineering Specifications
| Chemical Media | Carbon Disulfide |
|---|---|
| Chemical Formula | CS2 |
| CAS Registry Number | 75-15-0 |
| Chemical Classification | Inorganic Salt / Brine / Ionic Solution |
| Wetted Material | Viton® (FKM Fluoroelastomer) (High-Performance Fluorinated Elastomer) |
| Official Resistance Rating | A1 – Excellent (No Effect up to 120°F / 49°C) (Grade A) |
| Recommended Temperature Window | Up to 120°F (49°C) verified; up to material thermal limit in non-pressurized service (Material limit: -15°F to 400°F (-26°C to 204°C)) |
| Top Grade-A Alternatives | Stainless Steel, PTFE, PVDF |
| Data Verification Status | Verified against Cole-Parmer, ISM & Graco industrial chemical resistance charts. |
Chemical & Material Interaction Analysis
Carbon Disulfide is classified as an inorganic salt / brine / ionic solution (electrolytic corrosion risk in metals, especially chlorides/halides, while thermoplastics remain largely inert). Used in water treatment, chemical dosing, brine handling, and industrial process streams. When selecting wetted components for Viton, engineers must account for both concentration-dependent chemical attack and thermal stress:
- Reaction & Failure Mechanism: Exhibits negligible weight change, zero surface crazing, and minimal dimensional swelling (<1%) across extended immersion testing.
- Material Profile (Viton): Exceptional resistance to aliphatic and aromatic hydrocarbons, petroleum oils, concentrated mineral acids, and halogenated solvents at elevated temperatures. However, severely attacked by polar oxygenated solvents (acetone, MEK, ethyl acetate, THF), anhydrous ammonia, primary amines, and hot concentrated caustic soda via dehydrofluorination.
- Application Scope: Common wetted components include O-ring static/dynamic seals, pump diaphragms, valve seats, flange gaskets, and chemical transfer hose liners.
Cross-Material Compatibility Comparison for Carbon Disulfide
To help you select the longest-lasting piping, valve lining, or O-ring seal for Carbon Disulfide, the table below compares Viton against 8 other common industrial engineering materials:
| Wetted Material | Compatibility Rating | Service Recommendation | Material Temp Range |
|---|---|---|---|
| Polypropylene (PP Homopolymer & Copolymer) | D-Severe Effect | Incompatible — Immediate Failure Risk | 32°F to 180°F (0°C to 82°C) |
| 316 / 304 Austenitic Stainless Steel | A1-Excellent | Safe for Continuous Industrial Service | -325°F to 800°F (-198°C to 426°C) |
| Viton® (FKM Fluoroelastomer) (Current Page) | A1-Excellent | Safe for Continuous Industrial Service | -15°F to 400°F (-26°C to 204°C) |
| PTFE (Teflon® / Polytetrafluoroethylene) | A-Excellent | Safe for Continuous Industrial Service | -328°F to 500°F (-200°C to 260°C) |
| EPDM (Ethylene Propylene Diene Monomer) | D-Severe Effect | Incompatible — Immediate Failure Risk | -60°F to 300°F (-51°C to 149°C) |
| PVC Type I (Unplasticized Polyvinyl Chloride / uPVC) | B-Good | Acceptable with Operating Controls | 32°F to 140°F (0°C to 60°C) |
| PVDF (Kynar® / Polyvinylidene Fluoride) | A-Excellent | Safe for Continuous Industrial Service | -40°F to 280°F (-40°C to 138°C) |
| Buna-N (Nitrile / NBR Elastomer) | B-Good | Acceptable with Operating Controls | -40°F to 250°F (-40°C to 121°C) |
| HDPE (High-Density Polyethylene) | D-Severe Effect | Incompatible — Immediate Failure Risk | -60°F to 140°F (-51°C to 60°C) |
Frequently Asked Questions (FAQ)
Is Viton compatible with Carbon Disulfide?
Viton is rated A1-Excellent (Safe for Continuous Industrial Service) with Carbon Disulfide (Formula: CS2, CAS: 75-15-0). Exhibits negligible weight change, zero surface crazing, and minimal dimensional swelling (<1%) across extended immersion testing. Approved for primary wetted components including continuous-duty piping, bulk storage tanks, pump manifolds, and static/dynamic seals.
What is the best alternative material for handling Carbon Disulfide?
If Viton does not meet your temperature or pressure requirements for Carbon Disulfide, the highest-rated Grade A alternatives are Stainless Steel, PTFE, PVDF. Always verify O-ring elastomers and metallic fasteners separately before full-scale deployment.
Technical Engineering FAQs: Carbon Disulfide vs Viton
Click any question below for chemical failure-mode specifics, thermal derating limits, and material selection rules: