Carbon Disulfide vs PVDF Compatibility
Verified chemical resistance rating (Safe for Continuous Industrial Service), thermal boundary limits (Ambient to elevated operating temperatures within standard material limits), and material specification guide for PVDF exposed to Carbon Disulfide in Inorganic Salt / Brine / Ionic Solution service.
Carbon Disulfide vs PVDF: A-Excellent
Exposing PVDF to Carbon Disulfide (Formula: CS2, CAS: 75-15-0) carries an official rating of A-Excellent (Safe for Continuous Industrial Service). Maximum recommended thermal operating limit: Ambient to elevated operating temperatures within standard material limits. Best Grade A alternative materials for continuous or high-temperature service: Stainless Steel, Viton, PTFE.
Technical Specifications and Operating Parameters
| Chemical Medium | Carbon Disulfide |
|---|---|
| Chemical Formula | CS2 |
| CAS Registry Number | 75-15-0 |
| Chemical Functional Class | Inorganic Salt / Brine / Ionic Solution |
| Wetted Material | PVDF |
| Official Resistance Rating | A-Excellent (Grade A) |
| Engineering Service Verdict | Safe for Continuous Industrial Service |
| Max Temp and Concentration Limit | Ambient to elevated operating temperatures within standard material limits |
| Best Grade A Alternatives | Stainless Steel, Viton, PTFE |
| Backtest and Audit Verification | Verified against Cole-Parmer, ISM, Graco & CP Lab Safety industrial chemical resistance charts. |
Carbon Disulfide Cross-Material Comparison Matrix (9 Materials)
Direct benchmark ratings across all 9 reference industrial materials for Carbon Disulfide:
| Material Name | Compatibility Rating | Service Verdict | Temperature Limit | Datasheet |
|---|---|---|---|---|
| Buna-N | B-Good | Acceptable with Operating Controls | Ambient service (72°F / 22°C) preferred; monitor wear in continuous service | Report |
| EPDM | D-Severe Effect | Incompatible — Immediate Failure Risk | Not recommended at any temperature or concentration | Report |
| HDPE | D-Severe Effect | Incompatible — Immediate Failure Risk | Not recommended at any temperature or concentration | Report |
| Polypropylene | D-Severe Effect | Incompatible — Immediate Failure Risk | Not recommended at any temperature or concentration | Report |
| PTFE | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| PVC | B-Good | Acceptable with Operating Controls | Ambient service (72°F / 22°C) preferred; monitor wear in continuous service | Report |
| PVDF | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Stainless Steel | A1-Excellent | Safe for Continuous Industrial Service | Up to 120°F (49°C) verified; up to material thermal limit in non-pressurized service | Report |
| Viton | A1-Excellent | Safe for Continuous Industrial Service | Up to 120°F (49°C) verified; up to material thermal limit in non-pressurized service | Report |
Chemical and Material Interaction Analysis
Engineering Compatibility Verdict
Carbon Disulfide vs PVDF: A – Excellent (Fully Compatible)
Summary Verdict: PVDF (Kynar® / Polyvinylidene Fluoride) is rated A-Excellent (Safe for Continuous Industrial Service) when exposed to Carbon Disulfide (Formula: CS2, CAS: 75-15-0). Approved for continuous fluid handling, bulk storage, valves, and sealing assemblies.
Quick Engineering Specifications
| Chemical Media | Carbon Disulfide |
|---|---|
| Chemical Formula | CS2 |
| CAS Registry Number | 75-15-0 |
| Chemical Classification | Inorganic Salt / Brine / Ionic Solution |
| Wetted Material | PVDF (Kynar® / Polyvinylidene Fluoride) (High-Purity Semi-Crystalline Fluoropolymer) |
| Official Resistance Rating | A – Excellent (Fully Compatible) (Grade A) |
| Recommended Temperature Window | Ambient to elevated operating temperatures within standard material limits (Material limit: -40°F to 280°F (-40°C to 138°C)) |
| Top Grade-A Alternatives | Stainless Steel, Viton, PTFE |
| Data Verification Status | Verified against Cole-Parmer, ISM, Graco & CP Lab Safety industrial chemical resistance charts. |
Chemical & Material Interaction Analysis
Carbon Disulfide is classified as an inorganic salt / brine / ionic solution (electrolytic corrosion risk in metals, especially chlorides/halides, while thermoplastics remain largely inert). Used in water treatment, chemical dosing, brine handling, and industrial process streams. When selecting wetted components for PVDF, engineers must account for both concentration-dependent chemical attack and thermal stress:
- Reaction & Failure Mechanism: Chemically inert interface with no measurable corrosion, polymer chain scission, or elastomeric swell under standard operating conditions.
- Material Profile (PVDF): Superior mechanical strength and abrasion resistance compared to PTFE, with exceptional resistance to halogens (wet/dry chlorine, bromine), strong acids, and oxidizers. However, attacked by strong polar aprotic solvents (acetone, MEK, DMF, DMSO, NMP), primary amines, and high-concentration caustic soda (NaOH >50%) which cause dehydrofluorination.
- Application Scope: Common wetted components include high-purity acid distribution lines, wet-bench chemical etching systems, bleach/halogen injection quills, and magnetic-drive pump heads.
Cross-Material Compatibility Comparison for Carbon Disulfide
To help you select the longest-lasting piping, valve lining, or O-ring seal for Carbon Disulfide, the table below compares PVDF against 8 other common industrial engineering materials:
| Wetted Material | Compatibility Rating | Service Recommendation | Material Temp Range |
|---|---|---|---|
| Polypropylene (PP Homopolymer & Copolymer) | D-Severe Effect | Incompatible — Immediate Failure Risk | 32°F to 180°F (0°C to 82°C) |
| 316 / 304 Austenitic Stainless Steel | A1-Excellent | Safe for Continuous Industrial Service | -325°F to 800°F (-198°C to 426°C) |
| Viton® (FKM Fluoroelastomer) | A1-Excellent | Safe for Continuous Industrial Service | -15°F to 400°F (-26°C to 204°C) |
| PTFE (Teflon® / Polytetrafluoroethylene) | A-Excellent | Safe for Continuous Industrial Service | -328°F to 500°F (-200°C to 260°C) |
| EPDM (Ethylene Propylene Diene Monomer) | D-Severe Effect | Incompatible — Immediate Failure Risk | -60°F to 300°F (-51°C to 149°C) |
| PVC Type I (Unplasticized Polyvinyl Chloride / uPVC) | B-Good | Acceptable with Operating Controls | 32°F to 140°F (0°C to 60°C) |
| PVDF (Kynar® / Polyvinylidene Fluoride) (Current Page) | A-Excellent | Safe for Continuous Industrial Service | -40°F to 280°F (-40°C to 138°C) |
| Buna-N (Nitrile / NBR Elastomer) | B-Good | Acceptable with Operating Controls | -40°F to 250°F (-40°C to 121°C) |
| HDPE (High-Density Polyethylene) | D-Severe Effect | Incompatible — Immediate Failure Risk | -60°F to 140°F (-51°C to 60°C) |
Frequently Asked Questions (FAQ)
Is PVDF compatible with Carbon Disulfide?
PVDF is rated A-Excellent (Safe for Continuous Industrial Service) with Carbon Disulfide (Formula: CS2, CAS: 75-15-0). Chemically inert interface with no measurable corrosion, polymer chain scission, or elastomeric swell under standard operating conditions. Approved for continuous fluid handling, bulk storage, valves, and sealing assemblies.
What is the best alternative material for handling Carbon Disulfide?
If PVDF does not meet your temperature or pressure requirements for Carbon Disulfide, the highest-rated Grade A alternatives are Stainless Steel, Viton, PTFE. Always verify O-ring elastomers and metallic fasteners separately before full-scale deployment.
Technical Engineering FAQs: Carbon Disulfide vs PVDF
Click any question below for chemical failure-mode specifics, thermal derating limits, and material selection rules: