Aniline Hydrochloride vs EPDM Compatibility
Verified chemical resistance rating (Safe for Continuous Industrial Service), thermal boundary limits (Ambient to elevated operating temperatures within standard material limits), and material specification guide for EPDM exposed to Aniline Hydrochloride in Alkaline Base / Amine service.
Aniline Hydrochloride vs EPDM: A-Excellent
Exposing EPDM to Aniline Hydrochloride (Formula: C6H5NH2·HCl (C6H8ClN), CAS: 142-04-1) carries an official rating of A-Excellent (Safe for Continuous Industrial Service). Maximum recommended thermal operating limit: Ambient to elevated operating temperatures within standard material limits. Best Grade A alternative materials for continuous or high-temperature service: Viton, PTFE, PVDF.
Technical Specifications and Operating Parameters
| Chemical Medium | Aniline Hydrochloride |
|---|---|
| Chemical Formula | C6H5NH2·HCl (C6H8ClN) |
| CAS Registry Number | 142-04-1 |
| Chemical Functional Class | Alkaline Base / Amine |
| Wetted Material | EPDM |
| Official Resistance Rating | A-Excellent (Grade A) |
| Engineering Service Verdict | Safe for Continuous Industrial Service |
| Max Temp and Concentration Limit | Ambient to elevated operating temperatures within standard material limits |
| Best Grade A Alternatives | Viton, PTFE, PVDF |
| Backtest and Audit Verification | Verified against Cole-Parmer, ISM, Graco & CP Lab Safety industrial chemical resistance charts. |
Aniline Hydrochloride Cross-Material Comparison Matrix (9 Materials)
Direct benchmark ratings across all 9 reference industrial materials for Aniline Hydrochloride:
| Material Name | Compatibility Rating | Service Verdict | Temperature Limit | Datasheet |
|---|---|---|---|---|
| Buna-N | D-Severe Effect | Incompatible — Immediate Failure Risk | Not recommended at any temperature or concentration | Report |
| EPDM | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| HDPE | D-Severe Effect | Incompatible — Immediate Failure Risk | Not recommended at any temperature or concentration | Report |
| Polypropylene | D-Severe Effect | Incompatible — Immediate Failure Risk | Not recommended at any temperature or concentration | Report |
| PTFE | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| PVC | D-Severe Effect | Incompatible — Immediate Failure Risk | Not recommended at any temperature or concentration | Report |
| PVDF | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Stainless Steel | D-Severe Effect | Incompatible — Immediate Failure Risk | Not recommended at any temperature or concentration | Report |
| Viton | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
Chemical and Material Interaction Analysis
Engineering Compatibility Verdict
Aniline Hydrochloride vs EPDM: A – Excellent (Fully Compatible)
Summary Verdict: EPDM (Ethylene Propylene Diene Monomer) is rated A-Excellent (Safe for Continuous Industrial Service) when exposed to Aniline Hydrochloride (Formula: C6H5NH2·HCl (C6H8ClN), CAS: 142-04-1). Approved for continuous fluid handling, bulk storage, valves, and sealing assemblies.
Quick Engineering Specifications
| Chemical Media | Aniline Hydrochloride |
|---|---|
| Chemical Formula | C6H5NH2·HCl (C6H8ClN) |
| CAS Registry Number | 142-04-1 |
| Chemical Classification | Alkaline Base / Amine |
| Wetted Material | EPDM (Ethylene Propylene Diene Monomer) (Synthetic Polar-Service Elastomer) |
| Official Resistance Rating | A – Excellent (Fully Compatible) (Grade A) |
| Recommended Temperature Window | Ambient to elevated operating temperatures within standard material limits (Material limit: -60°F to 300°F (-51°C to 149°C)) |
| Top Grade-A Alternatives | Viton, PTFE, PVDF |
| Data Verification Status | Verified against Cole-Parmer, ISM, Graco & CP Lab Safety industrial chemical resistance charts. |
Chemical & Material Interaction Analysis
Aniline Hydrochloride is classified as an alkaline base / amine (high-pH alkaline attack, stress-corrosion risk at high temperatures, and dehydrofluorination of fluoroelastomers). Used in caustic scrubbing, CIP (Clean-in-Place) sanitation, neutralization, and chemical synthesis. When selecting wetted components for EPDM, engineers must account for both concentration-dependent chemical attack and thermal stress:
- Reaction & Failure Mechanism: Chemically inert interface with no measurable corrosion, polymer chain scission, or elastomeric swell under standard operating conditions.
- Material Profile (EPDM): Outstanding resistance to polar fluids including ketones (acetone, MEK), alcohols, glycols, phosphate ester hydraulic fluids (Skydrol), alkalis, and dilute acids. However, exhibits rapid, catastrophic volumetric swelling and softening when exposed to petroleum oils, gasoline, diesel, kerosene, aliphatic/aromatic hydrocarbons, and chlorinated solvents.
- Application Scope: Common wetted components include butterfly valve liners, O-rings, sanitary Tri-Clamp gaskets, caustic dosing hoses, and water/wastewater treatment seals.
Cross-Material Compatibility Comparison for Aniline Hydrochloride
To help you select the longest-lasting piping, valve lining, or O-ring seal for Aniline Hydrochloride, the table below compares EPDM against 8 other common industrial engineering materials:
| Wetted Material | Compatibility Rating | Service Recommendation | Material Temp Range |
|---|---|---|---|
| Polypropylene (PP Homopolymer & Copolymer) | D-Severe Effect | Incompatible — Immediate Failure Risk | 32°F to 180°F (0°C to 82°C) |
| 316 / 304 Austenitic Stainless Steel | D-Severe Effect | Incompatible — Immediate Failure Risk | -325°F to 800°F (-198°C to 426°C) |
| Viton® (FKM Fluoroelastomer) | A-Excellent | Safe for Continuous Industrial Service | -15°F to 400°F (-26°C to 204°C) |
| PTFE (Teflon® / Polytetrafluoroethylene) | A-Excellent | Safe for Continuous Industrial Service | -328°F to 500°F (-200°C to 260°C) |
| EPDM (Ethylene Propylene Diene Monomer) (Current Page) | A-Excellent | Safe for Continuous Industrial Service | -60°F to 300°F (-51°C to 149°C) |
| PVC Type I (Unplasticized Polyvinyl Chloride / uPVC) | D-Severe Effect | Incompatible — Immediate Failure Risk | 32°F to 140°F (0°C to 60°C) |
| PVDF (Kynar® / Polyvinylidene Fluoride) | A-Excellent | Safe for Continuous Industrial Service | -40°F to 280°F (-40°C to 138°C) |
| Buna-N (Nitrile / NBR Elastomer) | D-Severe Effect | Incompatible — Immediate Failure Risk | -40°F to 250°F (-40°C to 121°C) |
| HDPE (High-Density Polyethylene) | D-Severe Effect | Incompatible — Immediate Failure Risk | -60°F to 140°F (-51°C to 60°C) |
Frequently Asked Questions (FAQ)
Is EPDM compatible with Aniline Hydrochloride?
EPDM is rated A-Excellent (Safe for Continuous Industrial Service) with Aniline Hydrochloride (Formula: C6H5NH2·HCl (C6H8ClN), CAS: 142-04-1). Chemically inert interface with no measurable corrosion, polymer chain scission, or elastomeric swell under standard operating conditions. Approved for continuous fluid handling, bulk storage, valves, and sealing assemblies.
What is the best alternative material for handling Aniline Hydrochloride?
If EPDM does not meet your temperature or pressure requirements for Aniline Hydrochloride, the highest-rated Grade A alternatives are Viton, PTFE, PVDF. Always verify O-ring elastomers and metallic fasteners separately before full-scale deployment.
Technical Engineering FAQs: Aniline Hydrochloride vs EPDM
Click any question below for chemical failure-mode specifics, thermal derating limits, and material selection rules: