Carbon Bisulfide vs PVC Compatibility
Verified chemical resistance rating (Acceptable with Operating Controls), thermal boundary limits (Ambient service (72°F / 22°C) preferred; monitor wear in continuous service), and material specification guide for PVC exposed to Carbon Bisulfide in Inorganic Salt / Brine / Ionic Solution service.
Carbon Bisulfide vs PVC: B-Good
Exposing PVC to Carbon Bisulfide (Formula: CS2 (Carbon Disulfide), CAS: 75-15-0) carries an official rating of B-Good (Acceptable with Operating Controls). Maximum recommended thermal operating limit: Ambient service (72°F / 22°C) preferred; monitor wear in continuous service. Best Grade A alternative materials for continuous or high-temperature service: Stainless Steel, Viton, PTFE, PVDF.
Technical Specifications and Operating Parameters
| Chemical Medium | Carbon Bisulfide |
|---|---|
| Chemical Formula | CS2 (Carbon Disulfide) |
| CAS Registry Number | 75-15-0 |
| Chemical Functional Class | Inorganic Salt / Brine / Ionic Solution |
| Wetted Material | PVC |
| Official Resistance Rating | B-Good (Grade B) |
| Engineering Service Verdict | Acceptable with Operating Controls |
| Max Temp and Concentration Limit | Ambient service (72°F / 22°C) preferred; monitor wear in continuous service |
| Best Grade A Alternatives | Stainless Steel, Viton, PTFE, PVDF |
| Backtest and Audit Verification | Verified against Cole-Parmer, ISM, Graco & CP Lab Safety industrial chemical resistance charts. |
Carbon Bisulfide Cross-Material Comparison Matrix (9 Materials)
Direct benchmark ratings across all 9 reference industrial materials for Carbon Bisulfide:
| Material Name | Compatibility Rating | Service Verdict | Temperature Limit | Datasheet |
|---|---|---|---|---|
| Buna-N | B-Good | Acceptable with Operating Controls | Ambient service (72°F / 22°C) preferred; monitor wear in continuous service | Report |
| EPDM | D-Severe Effect | Incompatible — Immediate Failure Risk | Not recommended at any temperature or concentration | Report |
| HDPE | D-Severe Effect | Incompatible — Immediate Failure Risk | Not recommended at any temperature or concentration | Report |
| Polypropylene | D-Severe Effect | Incompatible — Immediate Failure Risk | Not recommended at any temperature or concentration | Report |
| PTFE | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| PVC | B-Good | Acceptable with Operating Controls | Ambient service (72°F / 22°C) preferred; monitor wear in continuous service | Report |
| PVDF | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Stainless Steel | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Viton | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
Chemical and Material Interaction Analysis
Engineering Compatibility Verdict
Carbon Bisulfide vs PVC: B – Good (Minor Effect / Conditional)
Summary Verdict: PVC Type I (Unplasticized Polyvinyl Chloride / uPVC) is rated B-Good (Acceptable with Operating Controls) when exposed to Carbon Bisulfide (Formula: CS2 (Carbon Disulfide), CAS: 75-15-0). Acceptable for low-pressure piping, static seals, and scheduled-maintenance components. Implement periodic visual and dimensional inspection.
Quick Engineering Specifications
| Chemical Media | Carbon Bisulfide |
|---|---|
| Chemical Formula | CS2 (Carbon Disulfide) |
| CAS Registry Number | 75-15-0 |
| Chemical Classification | Inorganic Salt / Brine / Ionic Solution |
| Wetted Material | PVC Type I (Unplasticized Polyvinyl Chloride / uPVC) (Amorphous Rigid Halopolymer Thermoplastic) |
| Official Resistance Rating | B – Good (Minor Effect / Conditional) (Grade B) |
| Recommended Temperature Window | Ambient service (72°F / 22°C) preferred; monitor wear in continuous service (Material limit: 32°F to 140°F (0°C to 60°C)) |
| Top Grade-A Alternatives | Stainless Steel, Viton, PTFE, PVDF |
| Data Verification Status | Verified against Cole-Parmer, ISM, Graco & CP Lab Safety industrial chemical resistance charts. |
Chemical & Material Interaction Analysis
Carbon Bisulfide is classified as an inorganic salt / brine / ionic solution (electrolytic corrosion risk in metals, especially chlorides/halides, while thermoplastics remain largely inert). Used in water treatment, chemical dosing, brine handling, and industrial process streams. When selecting wetted components for PVC, engineers must account for both concentration-dependent chemical attack and thermal stress:
- Reaction & Failure Mechanism: Exhibits minor chemical interaction—such as slight discoloration, mild dimensional swell, or slow uniform surface etching—that does not immediately compromise structural integrity.
- Material Profile (PVC): Cost-effective, rigid corrosion resistance against mineral acids, alkalis, sodium hypochlorite bleach, and inorganic salt brines at ambient temperatures. However, low upper temperature limit (140°F/60°C) and immediate solvation/softening upon contact with ketones, esters, ethers, aromatic hydrocarbons, and chlorinated solvents.
- Application Scope: Common wetted components include Schedule 40/80 chemical feed piping, water/wastewater treatment headers, acid scrubbers, and ball/diaphragm valves.
Cross-Material Compatibility Comparison for Carbon Bisulfide
To help you select the longest-lasting piping, valve lining, or O-ring seal for Carbon Bisulfide, the table below compares PVC against 8 other common industrial engineering materials:
| Wetted Material | Compatibility Rating | Service Recommendation | Material Temp Range |
|---|---|---|---|
| Polypropylene (PP Homopolymer & Copolymer) | D-Severe Effect | Incompatible — Immediate Failure Risk | 32°F to 180°F (0°C to 82°C) |
| 316 / 304 Austenitic Stainless Steel | A-Excellent | Safe for Continuous Industrial Service | -325°F to 800°F (-198°C to 426°C) |
| Viton® (FKM Fluoroelastomer) | A-Excellent | Safe for Continuous Industrial Service | -15°F to 400°F (-26°C to 204°C) |
| PTFE (Teflon® / Polytetrafluoroethylene) | A-Excellent | Safe for Continuous Industrial Service | -328°F to 500°F (-200°C to 260°C) |
| EPDM (Ethylene Propylene Diene Monomer) | D-Severe Effect | Incompatible — Immediate Failure Risk | -60°F to 300°F (-51°C to 149°C) |
| PVC Type I (Unplasticized Polyvinyl Chloride / uPVC) (Current Page) | B-Good | Acceptable with Operating Controls | 32°F to 140°F (0°C to 60°C) |
| PVDF (Kynar® / Polyvinylidene Fluoride) | A-Excellent | Safe for Continuous Industrial Service | -40°F to 280°F (-40°C to 138°C) |
| Buna-N (Nitrile / NBR Elastomer) | B-Good | Acceptable with Operating Controls | -40°F to 250°F (-40°C to 121°C) |
| HDPE (High-Density Polyethylene) | D-Severe Effect | Incompatible — Immediate Failure Risk | -60°F to 140°F (-51°C to 60°C) |
Frequently Asked Questions (FAQ)
Is PVC compatible with Carbon Bisulfide?
PVC is rated B-Good (Acceptable with Operating Controls) with Carbon Bisulfide (Formula: CS2 (Carbon Disulfide), CAS: 75-15-0). Exhibits minor chemical interaction—such as slight discoloration, mild dimensional swell, or slow uniform surface etching—that does not immediately compromise structural integrity. Acceptable for low-pressure piping, static seals, and scheduled-maintenance components. Implement periodic visual and dimensional inspection.
What is the best alternative material for handling Carbon Bisulfide?
If PVC does not meet your temperature or pressure requirements for Carbon Bisulfide, the highest-rated Grade A alternatives are Stainless Steel, Viton, PTFE, PVDF. Always verify O-ring elastomers and metallic fasteners separately before full-scale deployment.
Technical Engineering FAQs: Carbon Bisulfide vs PVC
Click any question below for chemical failure-mode specifics, thermal derating limits, and material selection rules: