Cyclohexylamine vs HDPE Compatibility
Verified chemical resistance rating (Acceptable with Routine Inspection), thermal boundary limits (Up to 120°F (49°C) with minor absorption/corrosion allowance), and material specification guide for HDPE exposed to Cyclohexylamine in Alkaline Base / Amine service.
Cyclohexylamine vs HDPE: B1-Good
Exposing HDPE to Cyclohexylamine (Formula: C6H11NH2 (C6H13N), CAS: 108-91-8) carries an official rating of B1-Good (Acceptable with Routine Inspection). Maximum recommended thermal operating limit: Up to 120°F (49°C) with minor absorption/corrosion allowance. Best Grade A alternative materials for continuous or high-temperature service: Stainless Steel, PTFE.
Technical Specifications and Operating Parameters
| Chemical Medium | Cyclohexylamine |
|---|---|
| Chemical Formula | C6H11NH2 (C6H13N) |
| CAS Registry Number | 108-91-8 |
| Chemical Functional Class | Alkaline Base / Amine |
| Wetted Material | HDPE |
| Official Resistance Rating | B1-Good (Grade B) |
| Engineering Service Verdict | Acceptable with Routine Inspection |
| Max Temp and Concentration Limit | Up to 120°F (49°C) with minor absorption/corrosion allowance |
| Best Grade A Alternatives | Stainless Steel, PTFE |
| Backtest and Audit Verification | Verified against Cole-Parmer, ISM, Graco & CP Lab Safety industrial chemical resistance charts. |
Cyclohexylamine Cross-Material Comparison Matrix (9 Materials)
Direct benchmark ratings across all 9 reference industrial materials for Cyclohexylamine:
| Material Name | Compatibility Rating | Service Verdict | Temperature Limit | Datasheet |
|---|---|---|---|---|
| Buna-N | C-Fair | Caution: Limited / Intermittent Service Only | Ambient intermittent contact only; do not pressurize | Report |
| EPDM | B1-Good | Acceptable with Routine Inspection | Up to 120°F (49°C) with minor absorption/corrosion allowance | Report |
| HDPE | B1-Good | Acceptable with Routine Inspection | Up to 120°F (49°C) with minor absorption/corrosion allowance | Report |
| Polypropylene | B1-Good | Acceptable with Routine Inspection | Up to 120°F (49°C) with minor absorption/corrosion allowance | Report |
| PTFE | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| PVC | D-Severe Effect | Incompatible — Immediate Failure Risk | Not recommended at any temperature or concentration | Report |
| PVDF | C-Fair | Caution: Limited / Intermittent Service Only | Ambient intermittent contact only; do not pressurize | Report |
| Stainless Steel | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Viton | D-Severe Effect | Incompatible — Immediate Failure Risk | Not recommended at any temperature or concentration | Report |
Chemical and Material Interaction Analysis
Engineering Compatibility Verdict
Cyclohexylamine vs HDPE: B1 – Good (Minor Effect up to 120°F / 49°C)
Summary Verdict: HDPE (High-Density Polyethylene) is rated B1-Good (Acceptable with Routine Inspection) when exposed to Cyclohexylamine (Formula: C6H11NH2 (C6H13N), CAS: 108-91-8). Suitable for secondary transfer lines, static gaskets, and intermittent batch service. Avoid thin-walled high-stress dynamic seals without prior coupon testing.
Quick Engineering Specifications
| Chemical Media | Cyclohexylamine |
|---|---|
| Chemical Formula | C6H11NH2 (C6H13N) |
| CAS Registry Number | 108-91-8 |
| Chemical Classification | Alkaline Base / Amine |
| Wetted Material | HDPE (High-Density Polyethylene) (Linear Semi-Crystalline Polyolefin Thermoplastic) |
| Official Resistance Rating | B1 – Good (Minor Effect up to 120°F / 49°C) (Grade B) |
| Recommended Temperature Window | Up to 120°F (49°C) with minor absorption/corrosion allowance (Material limit: -60°F to 140°F (-51°C to 60°C)) |
| Top Grade-A Alternatives | Stainless Steel, PTFE |
| Data Verification Status | Verified against Cole-Parmer, ISM, Graco & CP Lab Safety industrial chemical resistance charts. |
Chemical & Material Interaction Analysis
Cyclohexylamine is classified as an alkaline base / amine (high-pH alkaline attack, stress-corrosion risk at high temperatures, and dehydrofluorination of fluoroelastomers). Used in caustic scrubbing, CIP (Clean-in-Place) sanitation, neutralization, and chemical synthesis. When selecting wetted components for HDPE, engineers must account for both concentration-dependent chemical attack and thermal stress:
- Reaction & Failure Mechanism: Causes slight surface absorption, minor weight gain (1%–5% swell in polymers), or a low corrosion rate (<2 to 20 mpy in metals) up to 120°F (49°C).
- Material Profile (HDPE): High impact strength (even at sub-zero temperatures) and excellent resistance to mineral acids, caustics, salt brines, and alcohols. However, lower upper temperature limit (140°F/60°C) than Polypropylene, with susceptibility to permeation and environmental stress cracking in aromatic/chlorinated hydrocarbons and strong oxidizers.
- Application Scope: Common wetted components include bulk chemical storage tanks, IBC totes, double-containment underground piping, and chemical drum liners.
Cross-Material Compatibility Comparison for Cyclohexylamine
To help you select the longest-lasting piping, valve lining, or O-ring seal for Cyclohexylamine, the table below compares HDPE against 8 other common industrial engineering materials:
| Wetted Material | Compatibility Rating | Service Recommendation | Material Temp Range |
|---|---|---|---|
| Polypropylene (PP Homopolymer & Copolymer) | B1-Good | Acceptable with Routine Inspection | 32°F to 180°F (0°C to 82°C) |
| 316 / 304 Austenitic Stainless Steel | A-Excellent | Safe for Continuous Industrial Service | -325°F to 800°F (-198°C to 426°C) |
| Viton® (FKM Fluoroelastomer) | D-Severe Effect | Incompatible — Immediate Failure Risk | -15°F to 400°F (-26°C to 204°C) |
| PTFE (Teflon® / Polytetrafluoroethylene) | A-Excellent | Safe for Continuous Industrial Service | -328°F to 500°F (-200°C to 260°C) |
| EPDM (Ethylene Propylene Diene Monomer) | B1-Good | Acceptable with Routine Inspection | -60°F to 300°F (-51°C to 149°C) |
| PVC Type I (Unplasticized Polyvinyl Chloride / uPVC) | D-Severe Effect | Incompatible — Immediate Failure Risk | 32°F to 140°F (0°C to 60°C) |
| PVDF (Kynar® / Polyvinylidene Fluoride) | C-Fair | Caution: Limited / Intermittent Service Only | -40°F to 280°F (-40°C to 138°C) |
| Buna-N (Nitrile / NBR Elastomer) | C-Fair | Caution: Limited / Intermittent Service Only | -40°F to 250°F (-40°C to 121°C) |
| HDPE (High-Density Polyethylene) (Current Page) | B1-Good | Acceptable with Routine Inspection | -60°F to 140°F (-51°C to 60°C) |
Frequently Asked Questions (FAQ)
Is HDPE compatible with Cyclohexylamine?
HDPE is rated B1-Good (Acceptable with Routine Inspection) with Cyclohexylamine (Formula: C6H11NH2 (C6H13N), CAS: 108-91-8). Causes slight surface absorption, minor weight gain (1%–5% swell in polymers), or a low corrosion rate (<2 to 20 mpy in metals) up to 120°F (49°C). Suitable for secondary transfer lines, static gaskets, and intermittent batch service. Avoid thin-walled high-stress dynamic seals without prior coupon testing.
What is the best alternative material for handling Cyclohexylamine?
If HDPE does not meet your temperature or pressure requirements for Cyclohexylamine, the highest-rated Grade A alternatives are Stainless Steel, PTFE. Always verify O-ring elastomers and metallic fasteners separately before full-scale deployment.
Technical Engineering FAQs: Cyclohexylamine vs HDPE
Click any question below for chemical failure-mode specifics, thermal derating limits, and material selection rules: