Hydraulic Oil (Petro) vs Buna-N Compatibility
Verified chemical resistance rating (Safe for Continuous Industrial Service), thermal boundary limits (Ambient to elevated operating temperatures within standard material limits), and material specification guide for Buna-N exposed to Hydraulic Oil (Petro) in Aliphatic Hydrocarbon / Fuel / Industrial Oil service.
Hydraulic Oil (Petro) vs Buna-N: A-Excellent
Exposing Buna-N to Hydraulic Oil (Petro) (Formula: C15–C50 Hydrotreated Paraffinic Base Oil, CAS: 64742-54-7) carries an official rating of A-Excellent (Safe for Continuous Industrial Service). Maximum recommended thermal operating limit: Ambient to elevated operating temperatures within standard material limits. Best Grade A alternative materials for continuous or high-temperature service: Stainless Steel, Viton, PTFE, PVDF.
Technical Specifications and Operating Parameters
| Chemical Medium | Hydraulic Oil (Petro) |
|---|---|
| Chemical Formula | C15–C50 Hydrotreated Paraffinic Base Oil |
| CAS Registry Number | 64742-54-7 |
| Chemical Functional Class | Aliphatic Hydrocarbon / Fuel / Industrial Oil |
| Wetted Material | Buna-N |
| Official Resistance Rating | A-Excellent (Grade A) |
| Engineering Service Verdict | Safe for Continuous Industrial Service |
| Max Temp and Concentration Limit | Ambient to elevated operating temperatures within standard material limits |
| Best Grade A Alternatives | Stainless Steel, Viton, PTFE, PVDF |
| Backtest and Audit Verification | Verified against Cole-Parmer, ISM, Graco & CP Lab Safety industrial chemical resistance charts. |
Hydraulic Oil (Petro) Cross-Material Comparison Matrix (9 Materials)
Direct benchmark ratings across all 9 reference industrial materials for Hydraulic Oil (Petro):
| Material Name | Compatibility Rating | Service Verdict | Temperature Limit | Datasheet |
|---|---|---|---|---|
| Buna-N | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| EPDM | D-Severe Effect | Incompatible — Immediate Failure Risk | Not recommended at any temperature or concentration | Report |
| HDPE | D-Severe Effect | Incompatible — Immediate Failure Risk | Not recommended at any temperature or concentration | Report |
| Polypropylene | D-Severe Effect | Incompatible — Immediate Failure Risk | Not recommended at any temperature or concentration | Report |
| PTFE | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| PVC | B-Good | Acceptable with Operating Controls | Ambient service (72°F / 22°C) preferred; monitor wear in continuous service | Report |
| PVDF | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Stainless Steel | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Viton | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
Chemical and Material Interaction Analysis
Engineering Compatibility Verdict
Hydraulic Oil (Petro) vs Buna-N: A – Excellent (Fully Compatible)
Summary Verdict: Buna-N (Nitrile / NBR Elastomer) is rated A-Excellent (Safe for Continuous Industrial Service) when exposed to Hydraulic Oil (Petro) (Formula: C15–C50 Hydrotreated Paraffinic Base Oil, CAS: 64742-54-7). Approved for continuous fluid handling, bulk storage, valves, and sealing assemblies.
Quick Engineering Specifications
| Chemical Media | Hydraulic Oil (Petro) |
|---|---|
| Chemical Formula | C15–C50 Hydrotreated Paraffinic Base Oil |
| CAS Registry Number | 64742-54-7 |
| Chemical Classification | Aliphatic Hydrocarbon / Fuel / Industrial Oil |
| Wetted Material | Buna-N (Nitrile / NBR Elastomer) (Acrylonitrile-Butadiene Copolymer Elastomer) |
| Official Resistance Rating | A – Excellent (Fully Compatible) (Grade A) |
| Recommended Temperature Window | Ambient to elevated operating temperatures within standard material limits (Material limit: -40°F to 250°F (-40°C to 121°C)) |
| Top Grade-A Alternatives | Stainless Steel, Viton, PTFE, PVDF |
| Data Verification Status | Verified against Cole-Parmer, ISM, Graco & CP Lab Safety industrial chemical resistance charts. |
Chemical & Material Interaction Analysis
Hydraulic Oil (Petro) is classified as an aliphatic hydrocarbon / fuel / industrial oil (hydrocarbon permeation and softening in non-oil-resistant polymers and EPDM rubbers). Used in fuel transfer lines, hydraulic power units, lubrication systems, and petrochemical storage. When selecting wetted components for Buna-N, engineers must account for both concentration-dependent chemical attack and thermal stress:
- Reaction & Failure Mechanism: Chemically inert interface with no measurable corrosion, polymer chain scission, or elastomeric swell under standard operating conditions.
- Material Profile (Buna-N): Workhorse elastomer for petroleum-based hydraulic oils, motor oils, diesel, gasoline, aliphatic hydrocarbons (hexane, heptane), water, and salt brines. However, poor resistance to ozone/weathering and rapidly destroyed by ketones, esters, chlorinated hydrocarbons, aromatic solvents, and strong oxidizing acids.
- Application Scope: Common wetted components include hydraulic O-rings, fuel transfer hoses, rotary shaft seals, oil gaskets, and general-purpose industrial pump elastomers.
Cross-Material Compatibility Comparison for Hydraulic Oil (Petro)
To help you select the longest-lasting piping, valve lining, or O-ring seal for Hydraulic Oil (Petro), the table below compares Buna-N against 8 other common industrial engineering materials:
| Wetted Material | Compatibility Rating | Service Recommendation | Material Temp Range |
|---|---|---|---|
| Polypropylene (PP Homopolymer & Copolymer) | D-Severe Effect | Incompatible — Immediate Failure Risk | 32°F to 180°F (0°C to 82°C) |
| 316 / 304 Austenitic Stainless Steel | A-Excellent | Safe for Continuous Industrial Service | -325°F to 800°F (-198°C to 426°C) |
| Viton® (FKM Fluoroelastomer) | A-Excellent | Safe for Continuous Industrial Service | -15°F to 400°F (-26°C to 204°C) |
| PTFE (Teflon® / Polytetrafluoroethylene) | A-Excellent | Safe for Continuous Industrial Service | -328°F to 500°F (-200°C to 260°C) |
| EPDM (Ethylene Propylene Diene Monomer) | D-Severe Effect | Incompatible — Immediate Failure Risk | -60°F to 300°F (-51°C to 149°C) |
| PVC Type I (Unplasticized Polyvinyl Chloride / uPVC) | B-Good | Acceptable with Operating Controls | 32°F to 140°F (0°C to 60°C) |
| PVDF (Kynar® / Polyvinylidene Fluoride) | A-Excellent | Safe for Continuous Industrial Service | -40°F to 280°F (-40°C to 138°C) |
| Buna-N (Nitrile / NBR Elastomer) (Current Page) | A-Excellent | Safe for Continuous Industrial Service | -40°F to 250°F (-40°C to 121°C) |
| HDPE (High-Density Polyethylene) | D-Severe Effect | Incompatible — Immediate Failure Risk | -60°F to 140°F (-51°C to 60°C) |
Frequently Asked Questions (FAQ)
Is Buna-N compatible with Hydraulic Oil (Petro)?
Buna-N is rated A-Excellent (Safe for Continuous Industrial Service) with Hydraulic Oil (Petro) (Formula: C15–C50 Hydrotreated Paraffinic Base Oil, CAS: 64742-54-7). Chemically inert interface with no measurable corrosion, polymer chain scission, or elastomeric swell under standard operating conditions. Approved for continuous fluid handling, bulk storage, valves, and sealing assemblies.
What is the best alternative material for handling Hydraulic Oil (Petro)?
If Buna-N does not meet your temperature or pressure requirements for Hydraulic Oil (Petro), the highest-rated Grade A alternatives are Stainless Steel, Viton, PTFE, PVDF. Always verify O-ring elastomers and metallic fasteners separately before full-scale deployment.
Technical Engineering FAQs: Hydraulic Oil (Petro) vs Buna-N
Click any question below for chemical failure-mode specifics, thermal derating limits, and material selection rules: