Hydrochloric Acid 37% vs HDPE Compatibility
Verified chemical resistance rating (Caution: Short-Term or Emergency Use Only), thermal boundary limits (Short-term exposure only; avoid continuous pressurized service), and material specification guide for HDPE exposed to Hydrochloric Acid 37% in Halogenated / Mineral Acid service.
Hydrochloric Acid 37% vs HDPE: C1-Fair
Exposing HDPE to Hydrochloric Acid 37% (Formula: HCl (37% aq. Reagent Grade), CAS: 7647-01-0) carries an official rating of C1-Fair (Caution: Short-Term or Emergency Use Only). Maximum recommended thermal operating limit: Short-term exposure only; avoid continuous pressurized service. Best Grade A alternative materials for continuous or high-temperature service: Viton, PTFE, PVC, PVDF.
Technical Specifications and Operating Parameters
| Chemical Medium | Hydrochloric Acid 37% |
|---|---|
| Chemical Formula | HCl (37% aq. Reagent Grade) |
| CAS Registry Number | 7647-01-0 |
| Chemical Functional Class | Halogenated / Mineral Acid |
| Wetted Material | HDPE |
| Official Resistance Rating | C1-Fair (Grade C) |
| Engineering Service Verdict | Caution: Short-Term or Emergency Use Only |
| Max Temp and Concentration Limit | Short-term exposure only; avoid continuous pressurized service |
| Best Grade A Alternatives | Viton, PTFE, PVC, PVDF |
| Backtest and Audit Verification | Verified against Cole-Parmer, ISM, Graco & CP Lab Safety industrial chemical resistance charts. |
Hydrochloric Acid 37% Cross-Material Comparison Matrix (9 Materials)
Direct benchmark ratings across all 9 reference industrial materials for Hydrochloric Acid 37%:
| Material Name | Compatibility Rating | Service Verdict | Temperature Limit | Datasheet |
|---|---|---|---|---|
| Buna-N | C-Fair | Caution: Limited / Intermittent Service Only | Ambient intermittent contact only; do not pressurize | Report |
| EPDM | B-Good | Acceptable with Operating Controls | Ambient service (72°F / 22°C) preferred; monitor wear in continuous service | Report |
| HDPE | C1-Fair | Caution: Short-Term or Emergency Use Only | Short-term exposure only; avoid continuous pressurized service | Report |
| Polypropylene | C-Fair | Caution: Limited / Intermittent Service Only | Ambient intermittent contact only; do not pressurize | Report |
| PTFE | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| PVC | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| PVDF | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Stainless Steel | D-Severe Effect | Incompatible — Immediate Failure Risk | Not recommended at any temperature or concentration | Report |
| Viton | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
Chemical and Material Interaction Analysis
Engineering Compatibility Verdict
Hydrochloric Acid 37% vs HDPE: C1 – Fair (Moderate Effect up to 120°F / 49°C)
Summary Verdict: HDPE (High-Density Polyethylene) is rated C1-Fair (Caution: Short-Term or Emergency Use Only) when exposed to Hydrochloric Acid 37% (Formula: HCl (37% aq. Reagent Grade), CAS: 7647-01-0). Not recommended for permanent pressurized piping or critical O-ring seals. Use only for short-duration flushing or non-critical gravity drain lines.
Quick Engineering Specifications
| Chemical Media | Hydrochloric Acid 37% |
|---|---|
| Chemical Formula | HCl (37% aq. Reagent Grade) |
| CAS Registry Number | 7647-01-0 |
| Chemical Classification | Halogenated / Mineral Acid |
| Wetted Material | HDPE (High-Density Polyethylene) (Linear Semi-Crystalline Polyolefin Thermoplastic) |
| Official Resistance Rating | C1 – Fair (Moderate Effect up to 120°F / 49°C) (Grade C) |
| Recommended Temperature Window | Short-term exposure only; avoid continuous pressurized service (Material limit: -60°F to 140°F (-51°C to 60°C)) |
| Top Grade-A Alternatives | Viton, PTFE, PVC, PVDF |
| Data Verification Status | Verified against Cole-Parmer, ISM, Graco & CP Lab Safety industrial chemical resistance charts. |
Chemical & Material Interaction Analysis
Hydrochloric Acid 37% is classified as a halogenated / mineral acid (aggressive halide ion attack, pitting risk in metals, and acid hydrolysis). Used in acid pickling, descaling, semiconductor etching, and industrial chemical processing. When selecting wetted components for HDPE, engineers must account for both concentration-dependent chemical attack and thermal stress:
- Reaction & Failure Mechanism: Induces moderate chemical attack, noticeable elastomeric swelling (10%–20%), loss of tensile modulus, or measurable metal pitting/etching (20–50 mpy).
- Material Profile (HDPE): High impact strength (even at sub-zero temperatures) and excellent resistance to mineral acids, caustics, salt brines, and alcohols. However, lower upper temperature limit (140°F/60°C) than Polypropylene, with susceptibility to permeation and environmental stress cracking in aromatic/chlorinated hydrocarbons and strong oxidizers.
- Application Scope: Common wetted components include bulk chemical storage tanks, IBC totes, double-containment underground piping, and chemical drum liners.
Cross-Material Compatibility Comparison for Hydrochloric Acid 37%
To help you select the longest-lasting piping, valve lining, or O-ring seal for Hydrochloric Acid 37%, the table below compares HDPE against 8 other common industrial engineering materials:
| Wetted Material | Compatibility Rating | Service Recommendation | Material Temp Range |
|---|---|---|---|
| Polypropylene (PP Homopolymer & Copolymer) | C-Fair | Caution: Limited / Intermittent Service Only | 32°F to 180°F (0°C to 82°C) |
| 316 / 304 Austenitic Stainless Steel | D-Severe Effect | Incompatible — Immediate Failure Risk | -325°F to 800°F (-198°C to 426°C) |
| Viton® (FKM Fluoroelastomer) | A-Excellent | Safe for Continuous Industrial Service | -15°F to 400°F (-26°C to 204°C) |
| PTFE (Teflon® / Polytetrafluoroethylene) | A-Excellent | Safe for Continuous Industrial Service | -328°F to 500°F (-200°C to 260°C) |
| EPDM (Ethylene Propylene Diene Monomer) | B-Good | Acceptable with Operating Controls | -60°F to 300°F (-51°C to 149°C) |
| PVC Type I (Unplasticized Polyvinyl Chloride / uPVC) | A-Excellent | Safe for Continuous Industrial Service | 32°F to 140°F (0°C to 60°C) |
| PVDF (Kynar® / Polyvinylidene Fluoride) | A-Excellent | Safe for Continuous Industrial Service | -40°F to 280°F (-40°C to 138°C) |
| Buna-N (Nitrile / NBR Elastomer) | C-Fair | Caution: Limited / Intermittent Service Only | -40°F to 250°F (-40°C to 121°C) |
| HDPE (High-Density Polyethylene) (Current Page) | C1-Fair | Caution: Short-Term or Emergency Use Only | -60°F to 140°F (-51°C to 60°C) |
Frequently Asked Questions (FAQ)
Is HDPE compatible with Hydrochloric Acid 37%?
HDPE is rated C1-Fair (Caution: Short-Term or Emergency Use Only) with Hydrochloric Acid 37% (Formula: HCl (37% aq. Reagent Grade), CAS: 7647-01-0). Induces moderate chemical attack, noticeable elastomeric swelling (10%–20%), loss of tensile modulus, or measurable metal pitting/etching (20–50 mpy). Not recommended for permanent pressurized piping or critical O-ring seals. Use only for short-duration flushing or non-critical gravity drain lines.
What is the best alternative material for handling Hydrochloric Acid 37%?
If HDPE does not meet your temperature or pressure requirements for Hydrochloric Acid 37%, the highest-rated Grade A alternatives are Viton, PTFE, PVC, PVDF. Always verify O-ring elastomers and metallic fasteners separately before full-scale deployment.
Technical Engineering FAQs: Hydrochloric Acid 37% vs HDPE
Click any question below for chemical failure-mode specifics, thermal derating limits, and material selection rules: