Silicone vs Buna-N Compatibility
Verified chemical resistance rating (Acceptable with Operating Controls), thermal boundary limits (Ambient service (72°F / 22°C) preferred; monitor wear in continuous service), and material specification guide for Buna-N exposed to Silicone in Industrial Process Chemical service.
Silicone vs Buna-N: B-Good
Exposing Buna-N to Silicone (Formula: (C2H6OSi)n (Polydimethylsiloxane), CAS: 63148-62-9) carries an official rating of B-Good (Acceptable with Operating Controls). Maximum recommended thermal operating limit: Ambient service (72°F / 22°C) preferred; monitor wear in continuous service. Best Grade A alternative materials for continuous or high-temperature service: Polypropylene, Stainless Steel, Viton, PTFE.
Technical Specifications and Operating Parameters
| Chemical Medium | Silicone |
|---|---|
| Chemical Formula | (C2H6OSi)n (Polydimethylsiloxane) |
| CAS Registry Number | 63148-62-9 |
| Chemical Functional Class | Industrial Process Chemical |
| Wetted Material | Buna-N |
| Official Resistance Rating | B-Good (Grade B) |
| Engineering Service Verdict | Acceptable with Operating Controls |
| Max Temp and Concentration Limit | Ambient service (72°F / 22°C) preferred; monitor wear in continuous service |
| Best Grade A Alternatives | Polypropylene, Stainless Steel, Viton, PTFE |
| Backtest and Audit Verification | Verified against Cole-Parmer, ISM, Graco & CP Lab Safety industrial chemical resistance charts. |
Silicone Cross-Material Comparison Matrix (9 Materials)
Direct benchmark ratings across all 9 reference industrial materials for Silicone:
| Material Name | Compatibility Rating | Service Verdict | Temperature Limit | Datasheet |
|---|---|---|---|---|
| Buna-N | B-Good | Acceptable with Operating Controls | Ambient service (72°F / 22°C) preferred; monitor wear in continuous service | Report |
| EPDM | B-Good | Acceptable with Operating Controls | Ambient service (72°F / 22°C) preferred; monitor wear in continuous service | Report |
| HDPE | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Polypropylene | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| PTFE | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| PVC | B-Good | Acceptable with Operating Controls | Ambient service (72°F / 22°C) preferred; monitor wear in continuous service | Report |
| PVDF | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Stainless Steel | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Viton | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
Chemical and Material Interaction Analysis
Engineering Compatibility Verdict
Silicone vs Buna-N: B – Good (Minor Effect / Conditional)
Summary Verdict: Buna-N (Nitrile / NBR Elastomer) is rated B-Good (Acceptable with Operating Controls) when exposed to Silicone (Formula: (C2H6OSi)n (Polydimethylsiloxane), CAS: 63148-62-9). Acceptable for low-pressure piping, static seals, and scheduled-maintenance components. Implement periodic visual and dimensional inspection.
Quick Engineering Specifications
| Chemical Media | Silicone |
|---|---|
| Chemical Formula | (C2H6OSi)n (Polydimethylsiloxane) |
| CAS Registry Number | 63148-62-9 |
| Chemical Classification | Industrial Process Chemical |
| Wetted Material | Buna-N (Nitrile / NBR Elastomer) (Acrylonitrile-Butadiene Copolymer Elastomer) |
| Official Resistance Rating | B – Good (Minor Effect / Conditional) (Grade B) |
| Recommended Temperature Window | Ambient service (72°F / 22°C) preferred; monitor wear in continuous service (Material limit: -40°F to 250°F (-40°C to 121°C)) |
| Top Grade-A Alternatives | Polypropylene, Stainless Steel, Viton, PTFE |
| Data Verification Status | Verified against Cole-Parmer, ISM, Graco & CP Lab Safety industrial chemical resistance charts. |
Chemical & Material Interaction Analysis
Silicone is classified as an industrial process chemical (requires verification of concentration and thermal operating envelopes prior to deployment). Used in chemical manufacturing, fluid transfer, and industrial storage systems. When selecting wetted components for Buna-N, engineers must account for both concentration-dependent chemical attack and thermal stress:
- Reaction & Failure Mechanism: Exhibits minor chemical interaction—such as slight discoloration, mild dimensional swell, or slow uniform surface etching—that does not immediately compromise structural integrity.
- Material Profile (Buna-N): Workhorse elastomer for petroleum-based hydraulic oils, motor oils, diesel, gasoline, aliphatic hydrocarbons (hexane, heptane), water, and salt brines. However, poor resistance to ozone/weathering and rapidly destroyed by ketones, esters, chlorinated hydrocarbons, aromatic solvents, and strong oxidizing acids.
- Application Scope: Common wetted components include hydraulic O-rings, fuel transfer hoses, rotary shaft seals, oil gaskets, and general-purpose industrial pump elastomers.
Cross-Material Compatibility Comparison for Silicone
To help you select the longest-lasting piping, valve lining, or O-ring seal for Silicone, the table below compares Buna-N against 8 other common industrial engineering materials:
| Wetted Material | Compatibility Rating | Service Recommendation | Material Temp Range |
|---|---|---|---|
| Polypropylene (PP Homopolymer & Copolymer) | A-Excellent | Safe for Continuous Industrial Service | 32°F to 180°F (0°C to 82°C) |
| 316 / 304 Austenitic Stainless Steel | A-Excellent | Safe for Continuous Industrial Service | -325°F to 800°F (-198°C to 426°C) |
| Viton® (FKM Fluoroelastomer) | A-Excellent | Safe for Continuous Industrial Service | -15°F to 400°F (-26°C to 204°C) |
| PTFE (Teflon® / Polytetrafluoroethylene) | A-Excellent | Safe for Continuous Industrial Service | -328°F to 500°F (-200°C to 260°C) |
| EPDM (Ethylene Propylene Diene Monomer) | B-Good | Acceptable with Operating Controls | -60°F to 300°F (-51°C to 149°C) |
| PVC Type I (Unplasticized Polyvinyl Chloride / uPVC) | B-Good | Acceptable with Operating Controls | 32°F to 140°F (0°C to 60°C) |
| PVDF (Kynar® / Polyvinylidene Fluoride) | A-Excellent | Safe for Continuous Industrial Service | -40°F to 280°F (-40°C to 138°C) |
| Buna-N (Nitrile / NBR Elastomer) (Current Page) | B-Good | Acceptable with Operating Controls | -40°F to 250°F (-40°C to 121°C) |
| HDPE (High-Density Polyethylene) | A-Excellent | Safe for Continuous Industrial Service | -60°F to 140°F (-51°C to 60°C) |
Frequently Asked Questions (FAQ)
Is Buna-N compatible with Silicone?
Buna-N is rated B-Good (Acceptable with Operating Controls) with Silicone (Formula: (C2H6OSi)n (Polydimethylsiloxane), CAS: 63148-62-9). Exhibits minor chemical interaction—such as slight discoloration, mild dimensional swell, or slow uniform surface etching—that does not immediately compromise structural integrity. Acceptable for low-pressure piping, static seals, and scheduled-maintenance components. Implement periodic visual and dimensional inspection.
What is the best alternative material for handling Silicone?
If Buna-N does not meet your temperature or pressure requirements for Silicone, the highest-rated Grade A alternatives are Polypropylene, Stainless Steel, Viton, PTFE. Always verify O-ring elastomers and metallic fasteners separately before full-scale deployment.
Technical Engineering FAQs: Silicone vs Buna-N
Click any question below for chemical failure-mode specifics, thermal derating limits, and material selection rules: