Nitric Acid (5-10%) vs HDPE Compatibility
Verified chemical resistance rating (Safe for Continuous Industrial Service), thermal boundary limits (Ambient to elevated operating temperatures within standard material limits), and material specification guide for HDPE exposed to Nitric Acid (5-10%) in Strong Oxidizing / Mineral Acid service.
Nitric Acid (5-10%) vs HDPE: A-Excellent
Exposing HDPE to Nitric Acid (5-10%) (Formula: HNO3 (5–10% aq.), CAS: 7697-37-2) carries an official rating of A-Excellent (Safe for Continuous Industrial Service). Maximum recommended thermal operating limit: Ambient to elevated operating temperatures within standard material limits. Best Grade A alternative materials for continuous or high-temperature service: Polypropylene, Stainless Steel, Viton, PTFE.
Technical Specifications and Operating Parameters
| Chemical Medium | Nitric Acid (5-10%) |
|---|---|
| Chemical Formula | HNO3 (5–10% aq.) |
| CAS Registry Number | 7697-37-2 |
| Chemical Functional Class | Strong Oxidizing / Mineral Acid |
| Wetted Material | HDPE |
| Official Resistance Rating | A-Excellent (Grade A) |
| Engineering Service Verdict | Safe for Continuous Industrial Service |
| Max Temp and Concentration Limit | Ambient to elevated operating temperatures within standard material limits |
| Best Grade A Alternatives | Polypropylene, Stainless Steel, Viton, PTFE |
| Backtest and Audit Verification | Verified against Cole-Parmer, ISM, Graco & CP Lab Safety industrial chemical resistance charts. |
Nitric Acid (5-10%) Cross-Material Comparison Matrix (9 Materials)
Direct benchmark ratings across all 9 reference industrial materials for Nitric Acid (5-10%):
| Material Name | Compatibility Rating | Service Verdict | Temperature Limit | Datasheet |
|---|---|---|---|---|
| Buna-N | D-Severe Effect | Incompatible — Immediate Failure Risk | Not recommended at any temperature or concentration | Report |
| EPDM | B-Good | Acceptable with Operating Controls | Ambient service (72°F / 22°C) preferred; monitor wear in continuous service | Report |
| HDPE | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Polypropylene | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| PTFE | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| PVC | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| PVDF | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Stainless Steel | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Viton | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
Chemical and Material Interaction Analysis
Engineering Compatibility Verdict
Nitric Acid (5-10%) vs HDPE: A – Excellent (Fully Compatible)
Summary Verdict: HDPE (High-Density Polyethylene) is rated A-Excellent (Safe for Continuous Industrial Service) when exposed to Nitric Acid (5-10%) (Formula: HNO3 (5–10% aq.), CAS: 7697-37-2). Approved for continuous fluid handling, bulk storage, valves, and sealing assemblies.
Quick Engineering Specifications
| Chemical Media | Nitric Acid (5-10%) |
|---|---|
| Chemical Formula | HNO3 (5–10% aq.) |
| CAS Registry Number | 7697-37-2 |
| Chemical Classification | Strong Oxidizing / Mineral Acid |
| Wetted Material | HDPE (High-Density Polyethylene) (Linear Semi-Crystalline Polyolefin Thermoplastic) |
| Official Resistance Rating | A – Excellent (Fully Compatible) (Grade A) |
| Recommended Temperature Window | Ambient to elevated operating temperatures within standard material limits (Material limit: -60°F to 140°F (-51°C to 60°C)) |
| Top Grade-A Alternatives | Polypropylene, Stainless Steel, Viton, PTFE |
| Data Verification Status | Verified against Cole-Parmer, ISM, Graco & CP Lab Safety industrial chemical resistance charts. |
Chemical & Material Interaction Analysis
Nitric Acid (5-10%) is classified as a strong oxidizing / mineral acid (corrosive proton attack combined with strong oxidative potential). Used in chemical synthesis, metal pickling, pH neutralization, and industrial etching. When selecting wetted components for HDPE, engineers must account for both concentration-dependent chemical attack and thermal stress:
- Reaction & Failure Mechanism: Chemically inert interface with no measurable corrosion, polymer chain scission, or elastomeric swell under standard operating conditions.
- Material Profile (HDPE): High impact strength (even at sub-zero temperatures) and excellent resistance to mineral acids, caustics, salt brines, and alcohols. However, lower upper temperature limit (140°F/60°C) than Polypropylene, with susceptibility to permeation and environmental stress cracking in aromatic/chlorinated hydrocarbons and strong oxidizers.
- Application Scope: Common wetted components include bulk chemical storage tanks, IBC totes, double-containment underground piping, and chemical drum liners.
Cross-Material Compatibility Comparison for Nitric Acid (5-10%)
To help you select the longest-lasting piping, valve lining, or O-ring seal for Nitric Acid (5-10%), the table below compares HDPE against 8 other common industrial engineering materials:
| Wetted Material | Compatibility Rating | Service Recommendation | Material Temp Range |
|---|---|---|---|
| Polypropylene (PP Homopolymer & Copolymer) | A-Excellent | Safe for Continuous Industrial Service | 32°F to 180°F (0°C to 82°C) |
| 316 / 304 Austenitic Stainless Steel | A-Excellent | Safe for Continuous Industrial Service | -325°F to 800°F (-198°C to 426°C) |
| Viton® (FKM Fluoroelastomer) | A-Excellent | Safe for Continuous Industrial Service | -15°F to 400°F (-26°C to 204°C) |
| PTFE (Teflon® / Polytetrafluoroethylene) | A-Excellent | Safe for Continuous Industrial Service | -328°F to 500°F (-200°C to 260°C) |
| EPDM (Ethylene Propylene Diene Monomer) | B-Good | Acceptable with Operating Controls | -60°F to 300°F (-51°C to 149°C) |
| PVC Type I (Unplasticized Polyvinyl Chloride / uPVC) | A-Excellent | Safe for Continuous Industrial Service | 32°F to 140°F (0°C to 60°C) |
| PVDF (Kynar® / Polyvinylidene Fluoride) | A-Excellent | Safe for Continuous Industrial Service | -40°F to 280°F (-40°C to 138°C) |
| Buna-N (Nitrile / NBR Elastomer) | D-Severe Effect | Incompatible — Immediate Failure Risk | -40°F to 250°F (-40°C to 121°C) |
| HDPE (High-Density Polyethylene) (Current Page) | A-Excellent | Safe for Continuous Industrial Service | -60°F to 140°F (-51°C to 60°C) |
Frequently Asked Questions (FAQ)
Is HDPE compatible with Nitric Acid (5-10%)?
HDPE is rated A-Excellent (Safe for Continuous Industrial Service) with Nitric Acid (5-10%) (Formula: HNO3 (5–10% aq.), CAS: 7697-37-2). Chemically inert interface with no measurable corrosion, polymer chain scission, or elastomeric swell under standard operating conditions. Approved for continuous fluid handling, bulk storage, valves, and sealing assemblies.
What is the best alternative material for handling Nitric Acid (5-10%)?
If HDPE does not meet your temperature or pressure requirements for Nitric Acid (5-10%), the highest-rated Grade A alternatives are Polypropylene, Stainless Steel, Viton, PTFE. Always verify O-ring elastomers and metallic fasteners separately before full-scale deployment.
Technical Engineering FAQs: Nitric Acid (5-10%) vs HDPE
Click any question below for chemical failure-mode specifics, thermal derating limits, and material selection rules: