Backtested Material Engineering Datasheet

Oils: Diesel Fuel Oil (20, 30, 40, 50) vs PVC Compatibility

CAS: 68334-30-5 Formula: C₁₀H₂₀–C₁₅H₂₈ Petroleum Distillate Chemical: Adipic Acid Chemical: Alcohols: Methyl Chemical: Aluminum Potassium Sulfate 10% Chemical: Oils: Diesel Fuel Oil (20 Material: PVC Grade B

Verified chemical resistance rating (Acceptable with Operating Controls), thermal boundary limits (Ambient service (72°F / 22°C) preferred; monitor wear in continuous service), and material specification guide for PVC exposed to Oils: Diesel Fuel Oil (20, 30, 40, 50) in Aliphatic Hydrocarbon / Fuel / Industrial Oil service.

Official Resistance Rating Grade B

B-Good Acceptable with Operating Controls

PVC B-Good

Engineering Verdict — Acceptable with Operating Controls B-Good

Oils: Diesel Fuel Oil (20, 30, 40, 50) vs PVC: B-Good

Exposing PVC to Oils: Diesel Fuel Oil (20, 30, 40, 50) (Formula: C₁₀H₂₀–C₁₅H₂₈ Petroleum Distillate, CAS: 68334-30-5) carries an official rating of B-Good (Acceptable with Operating Controls). Maximum recommended thermal operating limit: Ambient service (72°F / 22°C) preferred; monitor wear in continuous service. Best Grade A alternative materials for continuous or high-temperature service: Polypropylene, Stainless Steel, Viton, PTFE.

Technical Specifications and Operating Parameters

Chemical Medium	Oils: Diesel Fuel Oil (20, 30, 40, 50)
Chemical Formula	C₁₀H₂₀–C₁₅H₂₈ Petroleum Distillate
CAS Registry Number	68334-30-5
Chemical Functional Class	Aliphatic Hydrocarbon / Fuel / Industrial Oil
Wetted Material	PVC
Official Resistance Rating	B-Good (Grade B)
Engineering Service Verdict	Acceptable with Operating Controls
Max Temp and Concentration Limit	Ambient service (72°F / 22°C) preferred; monitor wear in continuous service
Best Grade A Alternatives	Polypropylene, Stainless Steel, Viton, PTFE
Backtest and Audit Verification	Verified against Cole-Parmer, ISM, Graco & CP Lab Safety industrial chemical resistance charts.

Oils: Diesel Fuel Oil (20, 30, 40, 50) Cross-Material Comparison Matrix (9 Materials)

Direct benchmark ratings across all 9 reference industrial materials for Oils: Diesel Fuel Oil (20, 30, 40, 50):

Polypropylene A1-Excellent

316 Stainless Steel A-Excellent

Viton (FKM) A-Excellent

PTFE (Teflon) A-Excellent

EPDM D-Severe Effect

PVC Type I B-Good

PVDF (Kynar) A-Excellent

Buna-N (Nitrile) A-Excellent

HDPE A-Excellent

Material Name	Compatibility Rating	Service Verdict	Temperature Limit	Datasheet
Buna-N	B-Good	Acceptable with Operating Controls	Ambient service (72°F / 22°C) preferred; monitor wear in continuous service	Report
EPDM	B-Good	Acceptable with Operating Controls	Ambient service (72°F / 22°C) preferred; monitor wear in continuous service	Report
HDPE	B-Good	Acceptable with Operating Controls	Ambient service (72°F / 22°C) preferred; monitor wear in continuous service	Report
Polypropylene	B2-Good	Acceptable for Ambient Service Only	Strictly <= 72°F (22°C); do not use at elevated temperatures	Report
PTFE	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
PVC	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
PVDF	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
Stainless Steel	A1-Excellent	Safe for Continuous Industrial Service	Up to 120°F (49°C) verified; up to material thermal limit in non-pressurized service	Report
Viton	A2-Excellent	Safe for Continuous Ambient Service	Verified up to 72°F (22°C); conduct thermal de-rating above 100°F (38°C)	Report
Buna-N	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
EPDM	D-Severe Effect	Incompatible — Immediate Failure Risk	Not recommended at any temperature or concentration	Report
HDPE	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
Polypropylene	A1-Excellent	Safe for Continuous Industrial Service	Up to 120°F (49°C) verified; up to material thermal limit in non-pressurized service	Report
PTFE	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
PVC	B-Good	Acceptable with Operating Controls	Ambient service (72°F / 22°C) preferred; monitor wear in continuous service	Report
PVDF	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
Stainless Steel	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
Viton	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
Buna-N	B-Good	Acceptable with Operating Controls	Ambient service (72°F / 22°C) preferred; monitor wear in continuous service	Report
EPDM	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
HDPE	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
Polypropylene	A2-Excellent	Safe for Continuous Ambient Service	Verified up to 72°F (22°C); conduct thermal de-rating above 100°F (38°C)	Report
PTFE	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
PVC	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
PVDF	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
Stainless Steel	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
Viton	C-Fair	Caution: Limited / Intermittent Service Only	Ambient intermittent contact only; do not pressurize	Report
Buna-N	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
EPDM	D-Severe Effect	Incompatible — Immediate Failure Risk	Not recommended at any temperature or concentration	Report
HDPE	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
Polypropylene	A1-Excellent	Safe for Continuous Industrial Service	Up to 120°F (49°C) verified; up to material thermal limit in non-pressurized service	Report
PTFE	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
PVC	B-Good	Acceptable with Operating Controls	Ambient service (72°F / 22°C) preferred; monitor wear in continuous service	Report
PVDF	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
Stainless Steel	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
Viton	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
Buna-N	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
EPDM	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
HDPE	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
Polypropylene	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
PTFE	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
PVC	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
PVDF	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
Stainless Steel	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
Viton	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
Buna-N	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
EPDM	D-Severe Effect	Incompatible — Immediate Failure Risk	Not recommended at any temperature or concentration	Report
HDPE	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
Polypropylene	A1-Excellent	Safe for Continuous Industrial Service	Up to 120°F (49°C) verified; up to material thermal limit in non-pressurized service	Report
PTFE	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
PVC	B-Good	Acceptable with Operating Controls	Ambient service (72°F / 22°C) preferred; monitor wear in continuous service	Report
PVDF	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
Stainless Steel	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
Viton	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
Buna-N	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
EPDM	D-Severe Effect	Incompatible — Immediate Failure Risk	Not recommended at any temperature or concentration	Report
HDPE	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
Polypropylene	A1-Excellent	Safe for Continuous Industrial Service	Up to 120°F (49°C) verified; up to material thermal limit in non-pressurized service	Report
PTFE	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
PVC	B-Good	Acceptable with Operating Controls	Ambient service (72°F / 22°C) preferred; monitor wear in continuous service	Report
PVDF	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
Stainless Steel	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report
Viton	A-Excellent	Safe for Continuous Industrial Service	Ambient to elevated operating temperatures within standard material limits	Report

Chemical and Material Interaction Analysis

Engineering Compatibility Verdict

Oils: Diesel Fuel Oil (20, 30, 40, 50) vs PVC: B – Good (Minor Effect / Conditional)

Summary Verdict: PVC Type I (Unplasticized Polyvinyl Chloride / uPVC) is rated B-Good (Acceptable with Operating Controls) when exposed to Oils: Diesel Fuel Oil (20, 30, 40, 50) (Formula: C₁₀H₂₀–C₁₅H₂₈ Petroleum Distillate, CAS: 68334-30-5). Acceptable for low-pressure piping, static seals, and scheduled-maintenance components. Implement periodic visual and dimensional inspection.

Quick Engineering Specifications

Chemical Media	Oils: Diesel Fuel Oil (20, 30, 40, 50)
Chemical Formula	`C₁₀H₂₀–C₁₅H₂₈ Petroleum Distillate`
CAS Registry Number	`68334-30-5`
Chemical Classification	Aliphatic Hydrocarbon / Fuel / Industrial Oil
Wetted Material	PVC Type I (Unplasticized Polyvinyl Chloride / uPVC) (Amorphous Rigid Halopolymer Thermoplastic)
Official Resistance Rating	B – Good (Minor Effect / Conditional) (Grade B)
Recommended Temperature Window	Ambient service (72°F / 22°C) preferred; monitor wear in continuous service (Material limit: 32°F to 140°F (0°C to 60°C))
Top Grade-A Alternatives	Polypropylene, Stainless Steel, Viton, PTFE
Data Verification Status	Verified against Cole-Parmer, ISM, Graco & CP Lab Safety industrial chemical resistance charts.

Chemical & Material Interaction Analysis

Oils: Diesel Fuel Oil (20, 30, 40, 50) is classified as an aliphatic hydrocarbon / fuel / industrial oil (hydrocarbon permeation and softening in non-oil-resistant polymers and EPDM rubbers). Used in fuel transfer lines, hydraulic power units, lubrication systems, and petrochemical storage. When selecting wetted components for PVC, engineers must account for both concentration-dependent chemical attack and thermal stress:

Reaction & Failure Mechanism: Exhibits minor chemical interaction—such as slight discoloration, mild dimensional swell, or slow uniform surface etching—that does not immediately compromise structural integrity.
Material Profile (PVC): Cost-effective, rigid corrosion resistance against mineral acids, alkalis, sodium hypochlorite bleach, and inorganic salt brines at ambient temperatures. However, low upper temperature limit (140°F/60°C) and immediate solvation/softening upon contact with ketones, esters, ethers, aromatic hydrocarbons, and chlorinated solvents.
Application Scope: Common wetted components include Schedule 40/80 chemical feed piping, water/wastewater treatment headers, acid scrubbers, and ball/diaphragm valves.

Cross-Material Compatibility Comparison for Oils: Diesel Fuel Oil (20, 30, 40, 50)

To help you select the longest-lasting piping, valve lining, or O-ring seal for Oils: Diesel Fuel Oil (20, 30, 40, 50), the table below compares PVC against 8 other common industrial engineering materials:

Wetted Material	Compatibility Rating	Service Recommendation	Material Temp Range
Polypropylene (PP Homopolymer & Copolymer)	A1-Excellent	Safe for Continuous Industrial Service	32°F to 180°F (0°C to 82°C)
316 / 304 Austenitic Stainless Steel	A-Excellent	Safe for Continuous Industrial Service	-325°F to 800°F (-198°C to 426°C)
Viton® (FKM Fluoroelastomer)	A-Excellent	Safe for Continuous Industrial Service	-15°F to 400°F (-26°C to 204°C)
PTFE (Teflon® / Polytetrafluoroethylene)	A-Excellent	Safe for Continuous Industrial Service	-328°F to 500°F (-200°C to 260°C)
EPDM (Ethylene Propylene Diene Monomer)	D-Severe Effect	Incompatible — Immediate Failure Risk	-60°F to 300°F (-51°C to 149°C)
PVC Type I (Unplasticized Polyvinyl Chloride / uPVC) (Current Page)	B-Good	Acceptable with Operating Controls	32°F to 140°F (0°C to 60°C)
PVDF (Kynar® / Polyvinylidene Fluoride)	A-Excellent	Safe for Continuous Industrial Service	-40°F to 280°F (-40°C to 138°C)
Buna-N (Nitrile / NBR Elastomer)	A-Excellent	Safe for Continuous Industrial Service	-40°F to 250°F (-40°C to 121°C)
HDPE (High-Density Polyethylene)	A-Excellent	Safe for Continuous Industrial Service	-60°F to 140°F (-51°C to 60°C)

Frequently Asked Questions (FAQ)

Is PVC compatible with Oils: Diesel Fuel Oil (20, 30, 40, 50)?

PVC is rated B-Good (Acceptable with Operating Controls) with Oils: Diesel Fuel Oil (20, 30, 40, 50) (Formula: C₁₀H₂₀–C₁₅H₂₈ Petroleum Distillate, CAS: 68334-30-5). Exhibits minor chemical interaction—such as slight discoloration, mild dimensional swell, or slow uniform surface etching—that does not immediately compromise structural integrity. Acceptable for low-pressure piping, static seals, and scheduled-maintenance components. Implement periodic visual and dimensional inspection.

What is the best alternative material for handling Oils: Diesel Fuel Oil (20, 30, 40, 50)?

If PVC does not meet your temperature or pressure requirements for Oils: Diesel Fuel Oil (20, 30, 40, 50), the highest-rated Grade A alternatives are Polypropylene, Stainless Steel, Viton, PTFE. Always verify O-ring elastomers and metallic fasteners separately before full-scale deployment.

Technical Engineering FAQs: Oils: Diesel Fuel Oil (20, 30, 40, 50) vs PVC

Click any question below for chemical failure-mode specifics, thermal derating limits, and material selection rules:

Can PVC be specified for Oils: Diesel Fuel Oil (20, 30, 40, 50) process piping, valves, or gaskets?

PVC is rated Grade B (B-Good) for Oils: Diesel Fuel Oil (20, 30, 40, 50) (Acceptable with Operating Controls). It is suitable for secondary transfer lines, static gaskets, and intermittent batch service up to Ambient service (72°F / 22°C) preferred; monitor wear in continuous service with routine inspection. For high-stress dynamic seals or higher temperatures, upgrade to Polypropylene, Stainless Steel, Viton, PTFE.

How do all 9 reference materials compare for Oils: Diesel Fuel Oil (20, 30, 40, 50) (CAS 68334-30-5)?

For Oils: Diesel Fuel Oil (20, 30, 40, 50) (C₁₀H₂₀–C₁₅H₂₈ Petroleum Distillate, Aliphatic Hydrocarbon / Fuel / Industrial Oil), our cross-material compatibility matrix establishes the following ratings across all 9 engineering materials: Polypropylene: A1-Excellent | 316 Stainless Steel: A-Excellent | PTFE (Teflon): A-Excellent | PVDF (Kynar): A-Excellent | PVC Type I: B-Good | HDPE: A-Excellent | Viton (FKM): A-Excellent | EPDM: D-Severe Effect | Buna-N (Nitrile): A-Excellent.