Backtested Material Engineering Datasheet
Oils: Diesel Fuel Oil (20, 30, 40, 50) vs HDPE Compatibility
Verified chemical resistance rating (Safe for Continuous Industrial Service), thermal boundary limits (Ambient to elevated operating temperatures within standard material limits), and material specification guide for HDPE exposed to Oils: Diesel Fuel Oil (20, 30, 40, 50) in Aliphatic Hydrocarbon / Fuel / Industrial Oil service.
Official Resistance Rating
Grade A
A-Excellent
Safe for Continuous Industrial Service
HDPE
A-Excellent
Engineering Verdict — Safe for Continuous Industrial Service
A-Excellent
Oils: Diesel Fuel Oil (20, 30, 40, 50) vs HDPE: A-Excellent
Exposing HDPE to Oils: Diesel Fuel Oil (20, 30, 40, 50) (Formula: C10H20–C15H28 Petroleum Distillate, CAS: 68334-30-5) carries an official rating of A-Excellent (Safe for Continuous Industrial Service). Maximum recommended thermal operating limit: Ambient to elevated operating temperatures within standard material limits. Best Grade A alternative materials for continuous or high-temperature service: Polypropylene, Stainless Steel, Viton, PTFE.
Technical Specifications and Operating Parameters
| Chemical Medium | Oils: Diesel Fuel Oil (20, 30, 40, 50) |
|---|---|
| Chemical Formula | C10H20–C15H28 Petroleum Distillate |
| CAS Registry Number | 68334-30-5 |
| Chemical Functional Class | Aliphatic Hydrocarbon / Fuel / Industrial Oil |
| Wetted Material | HDPE |
| Official Resistance Rating | A-Excellent (Grade A) |
| Engineering Service Verdict | Safe for Continuous Industrial Service |
| Max Temp and Concentration Limit | Ambient to elevated operating temperatures within standard material limits |
| Best Grade A Alternatives | Polypropylene, Stainless Steel, Viton, PTFE |
| Backtest and Audit Verification | Verified against Cole-Parmer, ISM, Graco & CP Lab Safety industrial chemical resistance charts. |
Oils: Diesel Fuel Oil (20, 30, 40, 50) Cross-Material Comparison Matrix (9 Materials)
Direct benchmark ratings across all 9 reference industrial materials for Oils: Diesel Fuel Oil (20, 30, 40, 50):
Polypropylene
A1-Excellent
316 Stainless Steel
A-Excellent
Viton (FKM)
A-Excellent
PTFE (Teflon)
A-Excellent
EPDM
D-Severe Effect
PVC Type I
B-Good
PVDF (Kynar)
A-Excellent
Buna-N (Nitrile)
A-Excellent
HDPE
A-Excellent
| Material Name | Compatibility Rating | Service Verdict | Temperature Limit | Datasheet |
|---|---|---|---|---|
| Buna-N | B-Good | Acceptable with Operating Controls | Ambient service (72°F / 22°C) preferred; monitor wear in continuous service | Report |
| EPDM | B-Good | Acceptable with Operating Controls | Ambient service (72°F / 22°C) preferred; monitor wear in continuous service | Report |
| HDPE | B-Good | Acceptable with Operating Controls | Ambient service (72°F / 22°C) preferred; monitor wear in continuous service | Report |
| Polypropylene | B2-Good | Acceptable for Ambient Service Only | Strictly <= 72°F (22°C); do not use at elevated temperatures | Report |
| PTFE | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| PVC | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| PVDF | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Stainless Steel | A1-Excellent | Safe for Continuous Industrial Service | Up to 120°F (49°C) verified; up to material thermal limit in non-pressurized service | Report |
| Viton | A2-Excellent | Safe for Continuous Ambient Service | Verified up to 72°F (22°C); conduct thermal de-rating above 100°F (38°C) | Report |
| Buna-N | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| EPDM | D-Severe Effect | Incompatible — Immediate Failure Risk | Not recommended at any temperature or concentration | Report |
| HDPE | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Polypropylene | A1-Excellent | Safe for Continuous Industrial Service | Up to 120°F (49°C) verified; up to material thermal limit in non-pressurized service | Report |
| PTFE | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| PVC | B-Good | Acceptable with Operating Controls | Ambient service (72°F / 22°C) preferred; monitor wear in continuous service | Report |
| PVDF | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Stainless Steel | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Viton | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Buna-N | B-Good | Acceptable with Operating Controls | Ambient service (72°F / 22°C) preferred; monitor wear in continuous service | Report |
| EPDM | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| HDPE | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Polypropylene | A2-Excellent | Safe for Continuous Ambient Service | Verified up to 72°F (22°C); conduct thermal de-rating above 100°F (38°C) | Report |
| PTFE | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| PVC | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| PVDF | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Stainless Steel | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Viton | C-Fair | Caution: Limited / Intermittent Service Only | Ambient intermittent contact only; do not pressurize | Report |
| Buna-N | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| EPDM | D-Severe Effect | Incompatible — Immediate Failure Risk | Not recommended at any temperature or concentration | Report |
| HDPE | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Polypropylene | A1-Excellent | Safe for Continuous Industrial Service | Up to 120°F (49°C) verified; up to material thermal limit in non-pressurized service | Report |
| PTFE | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| PVC | B-Good | Acceptable with Operating Controls | Ambient service (72°F / 22°C) preferred; monitor wear in continuous service | Report |
| PVDF | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Stainless Steel | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Viton | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Buna-N | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| EPDM | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| HDPE | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Polypropylene | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| PTFE | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| PVC | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| PVDF | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Stainless Steel | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Viton | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Buna-N | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| EPDM | D-Severe Effect | Incompatible — Immediate Failure Risk | Not recommended at any temperature or concentration | Report |
| HDPE | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Polypropylene | A1-Excellent | Safe for Continuous Industrial Service | Up to 120°F (49°C) verified; up to material thermal limit in non-pressurized service | Report |
| PTFE | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| PVC | B-Good | Acceptable with Operating Controls | Ambient service (72°F / 22°C) preferred; monitor wear in continuous service | Report |
| PVDF | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Stainless Steel | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Viton | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Buna-N | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| EPDM | D-Severe Effect | Incompatible — Immediate Failure Risk | Not recommended at any temperature or concentration | Report |
| HDPE | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Polypropylene | A1-Excellent | Safe for Continuous Industrial Service | Up to 120°F (49°C) verified; up to material thermal limit in non-pressurized service | Report |
| PTFE | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| PVC | B-Good | Acceptable with Operating Controls | Ambient service (72°F / 22°C) preferred; monitor wear in continuous service | Report |
| PVDF | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Stainless Steel | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Viton | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
Chemical and Material Interaction Analysis
Engineering Compatibility Verdict
Oils: Diesel Fuel Oil (20, 30, 40, 50) vs HDPE: A – Excellent (Fully Compatible)
Summary Verdict: HDPE (High-Density Polyethylene) is rated A-Excellent (Safe for Continuous Industrial Service) when exposed to Oils: Diesel Fuel Oil (20, 30, 40, 50) (Formula: C10H20–C15H28 Petroleum Distillate, CAS: 68334-30-5). Approved for continuous fluid handling, bulk storage, valves, and sealing assemblies.
Quick Engineering Specifications
| Chemical Media | Oils: Diesel Fuel Oil (20, 30, 40, 50) |
|---|---|
| Chemical Formula | C10H20–C15H28 Petroleum Distillate |
| CAS Registry Number | 68334-30-5 |
| Chemical Classification | Aliphatic Hydrocarbon / Fuel / Industrial Oil |
| Wetted Material | HDPE (High-Density Polyethylene) (Linear Semi-Crystalline Polyolefin Thermoplastic) |
| Official Resistance Rating | A – Excellent (Fully Compatible) (Grade A) |
| Recommended Temperature Window | Ambient to elevated operating temperatures within standard material limits (Material limit: -60°F to 140°F (-51°C to 60°C)) |
| Top Grade-A Alternatives | Polypropylene, Stainless Steel, Viton, PTFE |
| Data Verification Status | Verified against Cole-Parmer, ISM, Graco & CP Lab Safety industrial chemical resistance charts. |
Chemical & Material Interaction Analysis
Oils: Diesel Fuel Oil (20, 30, 40, 50) is classified as an aliphatic hydrocarbon / fuel / industrial oil (hydrocarbon permeation and softening in non-oil-resistant polymers and EPDM rubbers). Used in fuel transfer lines, hydraulic power units, lubrication systems, and petrochemical storage. When selecting wetted components for HDPE, engineers must account for both concentration-dependent chemical attack and thermal stress:
- Reaction & Failure Mechanism: Chemically inert interface with no measurable corrosion, polymer chain scission, or elastomeric swell under standard operating conditions.
- Material Profile (HDPE): High impact strength (even at sub-zero temperatures) and excellent resistance to mineral acids, caustics, salt brines, and alcohols. However, lower upper temperature limit (140°F/60°C) than Polypropylene, with susceptibility to permeation and environmental stress cracking in aromatic/chlorinated hydrocarbons and strong oxidizers.
- Application Scope: Common wetted components include bulk chemical storage tanks, IBC totes, double-containment underground piping, and chemical drum liners.
Cross-Material Compatibility Comparison for Oils: Diesel Fuel Oil (20, 30, 40, 50)
To help you select the longest-lasting piping, valve lining, or O-ring seal for Oils: Diesel Fuel Oil (20, 30, 40, 50), the table below compares HDPE against 8 other common industrial engineering materials:
| Wetted Material | Compatibility Rating | Service Recommendation | Material Temp Range |
|---|---|---|---|
| Polypropylene (PP Homopolymer & Copolymer) | A1-Excellent | Safe for Continuous Industrial Service | 32°F to 180°F (0°C to 82°C) |
| 316 / 304 Austenitic Stainless Steel | A-Excellent | Safe for Continuous Industrial Service | -325°F to 800°F (-198°C to 426°C) |
| Viton® (FKM Fluoroelastomer) | A-Excellent | Safe for Continuous Industrial Service | -15°F to 400°F (-26°C to 204°C) |
| PTFE (Teflon® / Polytetrafluoroethylene) | A-Excellent | Safe for Continuous Industrial Service | -328°F to 500°F (-200°C to 260°C) |
| EPDM (Ethylene Propylene Diene Monomer) | D-Severe Effect | Incompatible — Immediate Failure Risk | -60°F to 300°F (-51°C to 149°C) |
| PVC Type I (Unplasticized Polyvinyl Chloride / uPVC) | B-Good | Acceptable with Operating Controls | 32°F to 140°F (0°C to 60°C) |
| PVDF (Kynar® / Polyvinylidene Fluoride) | A-Excellent | Safe for Continuous Industrial Service | -40°F to 280°F (-40°C to 138°C) |
| Buna-N (Nitrile / NBR Elastomer) | A-Excellent | Safe for Continuous Industrial Service | -40°F to 250°F (-40°C to 121°C) |
| HDPE (High-Density Polyethylene) (Current Page) | A-Excellent | Safe for Continuous Industrial Service | -60°F to 140°F (-51°C to 60°C) |
Frequently Asked Questions (FAQ)
Is HDPE compatible with Oils: Diesel Fuel Oil (20, 30, 40, 50)?
HDPE is rated A-Excellent (Safe for Continuous Industrial Service) with Oils: Diesel Fuel Oil (20, 30, 40, 50) (Formula: C10H20–C15H28 Petroleum Distillate, CAS: 68334-30-5). Chemically inert interface with no measurable corrosion, polymer chain scission, or elastomeric swell under standard operating conditions. Approved for continuous fluid handling, bulk storage, valves, and sealing assemblies.
What is the best alternative material for handling Oils: Diesel Fuel Oil (20, 30, 40, 50)?
If HDPE does not meet your temperature or pressure requirements for Oils: Diesel Fuel Oil (20, 30, 40, 50), the highest-rated Grade A alternatives are Polypropylene, Stainless Steel, Viton, PTFE. Always verify O-ring elastomers and metallic fasteners separately before full-scale deployment.
Technical Engineering FAQs: Oils: Diesel Fuel Oil (20, 30, 40, 50) vs HDPE
Click any question below for chemical failure-mode specifics, thermal derating limits, and material selection rules:
Can HDPE be specified for Oils: Diesel Fuel Oil (20, 30, 40, 50) process piping, valves, or gaskets?
Yes. Because HDPE achieves a Grade A (A-Excellent) rating with Oils: Diesel Fuel Oil (20, 30, 40, 50) (Safe for Continuous Industrial Service), it is approved for continuous-duty wetted components including process piping, storage tanks, valve bodies, and seals within the recommended operating window (Ambient to elevated operating temperatures within standard material limits).
How do all 9 reference materials compare for Oils: Diesel Fuel Oil (20, 30, 40, 50) (CAS 68334-30-5)?
For Oils: Diesel Fuel Oil (20, 30, 40, 50) (C10H20–C15H28 Petroleum Distillate, Aliphatic Hydrocarbon / Fuel / Industrial Oil), our cross-material compatibility matrix establishes the following ratings across all 9 engineering materials:
Polypropylene: A1-Excellent |
316 Stainless Steel: A-Excellent |
PTFE (Teflon): A-Excellent |
PVDF (Kynar): A-Excellent |
PVC Type I: B-Good |
HDPE: A-Excellent |
Viton (FKM): A-Excellent |
EPDM: D-Severe Effect |
Buna-N (Nitrile): A-Excellent.