Uric Acid vs PVDF Compatibility
Verified chemical resistance rating (Safe for Continuous Industrial Service), thermal boundary limits (Ambient to elevated operating temperatures within standard material limits), and material specification guide for PVDF exposed to Uric Acid in Organic / Weak Mineral Acid service.
Uric Acid vs PVDF: A-Excellent
Exposing PVDF to Uric Acid (Formula: C5H4N4O3, CAS: 69-93-2) carries an official rating of A-Excellent (Safe for Continuous Industrial Service). Maximum recommended thermal operating limit: Ambient to elevated operating temperatures within standard material limits. Best Grade A alternative materials for continuous or high-temperature service: Polypropylene, Viton, PTFE, PVC.
Technical Specifications and Operating Parameters
| Chemical Medium | Uric Acid |
|---|---|
| Chemical Formula | C5H4N4O3 |
| CAS Registry Number | 69-93-2 |
| Chemical Functional Class | Organic / Weak Mineral Acid |
| Wetted Material | PVDF |
| Official Resistance Rating | A-Excellent (Grade A) |
| Engineering Service Verdict | Safe for Continuous Industrial Service |
| Max Temp and Concentration Limit | Ambient to elevated operating temperatures within standard material limits |
| Best Grade A Alternatives | Polypropylene, Viton, PTFE, PVC |
| Backtest and Audit Verification | Verified against Cole-Parmer, ISM, Graco & CP Lab Safety industrial chemical resistance charts. |
Uric Acid Cross-Material Comparison Matrix (9 Materials)
Direct benchmark ratings across all 9 reference industrial materials for Uric Acid:
| Material Name | Compatibility Rating | Service Verdict | Temperature Limit | Datasheet |
|---|---|---|---|---|
| Buna-N | B-Good | Acceptable with Operating Controls | Ambient service (72°F / 22°C) preferred; monitor wear in continuous service | Report |
| EPDM | B-Good | Acceptable with Operating Controls | Ambient service (72°F / 22°C) preferred; monitor wear in continuous service | Report |
| HDPE | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Polypropylene | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| PTFE | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| PVC | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| PVDF | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
| Stainless Steel | B-Good | Acceptable with Operating Controls | Ambient service (72°F / 22°C) preferred; monitor wear in continuous service | Report |
| Viton | A-Excellent | Safe for Continuous Industrial Service | Ambient to elevated operating temperatures within standard material limits | Report |
Chemical and Material Interaction Analysis
Engineering Compatibility Verdict
Uric Acid vs PVDF: A – Excellent (Fully Compatible)
Summary Verdict: PVDF (Kynar® / Polyvinylidene Fluoride) is rated A-Excellent (Safe for Continuous Industrial Service) when exposed to Uric Acid (Formula: C5H4N4O3, CAS: 69-93-2). Approved for continuous fluid handling, bulk storage, valves, and sealing assemblies.
Quick Engineering Specifications
| Chemical Media | Uric Acid |
|---|---|
| Chemical Formula | C5H4N4O3 |
| CAS Registry Number | 69-93-2 |
| Chemical Classification | Organic / Weak Mineral Acid |
| Wetted Material | PVDF (Kynar® / Polyvinylidene Fluoride) (High-Purity Semi-Crystalline Fluoropolymer) |
| Official Resistance Rating | A – Excellent (Fully Compatible) (Grade A) |
| Recommended Temperature Window | Ambient to elevated operating temperatures within standard material limits (Material limit: -40°F to 280°F (-40°C to 138°C)) |
| Top Grade-A Alternatives | Polypropylene, Viton, PTFE, PVC |
| Data Verification Status | Verified against Cole-Parmer, ISM, Graco & CP Lab Safety industrial chemical resistance charts. |
Chemical & Material Interaction Analysis
Uric Acid is classified as an organic / weak mineral acid (mild to moderate acidic hydrolysis and potential elastomer swelling). Used in food processing, pharmaceutical formulation, buffering, and industrial cleaning. When selecting wetted components for PVDF, engineers must account for both concentration-dependent chemical attack and thermal stress:
- Reaction & Failure Mechanism: Chemically inert interface with no measurable corrosion, polymer chain scission, or elastomeric swell under standard operating conditions.
- Material Profile (PVDF): Superior mechanical strength and abrasion resistance compared to PTFE, with exceptional resistance to halogens (wet/dry chlorine, bromine), strong acids, and oxidizers. However, attacked by strong polar aprotic solvents (acetone, MEK, DMF, DMSO, NMP), primary amines, and high-concentration caustic soda (NaOH >50%) which cause dehydrofluorination.
- Application Scope: Common wetted components include high-purity acid distribution lines, wet-bench chemical etching systems, bleach/halogen injection quills, and magnetic-drive pump heads.
Cross-Material Compatibility Comparison for Uric Acid
To help you select the longest-lasting piping, valve lining, or O-ring seal for Uric Acid, the table below compares PVDF against 8 other common industrial engineering materials:
| Wetted Material | Compatibility Rating | Service Recommendation | Material Temp Range |
|---|---|---|---|
| Polypropylene (PP Homopolymer & Copolymer) | A-Excellent | Safe for Continuous Industrial Service | 32°F to 180°F (0°C to 82°C) |
| 316 / 304 Austenitic Stainless Steel | B-Good | Acceptable with Operating Controls | -325°F to 800°F (-198°C to 426°C) |
| Viton® (FKM Fluoroelastomer) | A-Excellent | Safe for Continuous Industrial Service | -15°F to 400°F (-26°C to 204°C) |
| PTFE (Teflon® / Polytetrafluoroethylene) | A-Excellent | Safe for Continuous Industrial Service | -328°F to 500°F (-200°C to 260°C) |
| EPDM (Ethylene Propylene Diene Monomer) | B-Good | Acceptable with Operating Controls | -60°F to 300°F (-51°C to 149°C) |
| PVC Type I (Unplasticized Polyvinyl Chloride / uPVC) | A-Excellent | Safe for Continuous Industrial Service | 32°F to 140°F (0°C to 60°C) |
| PVDF (Kynar® / Polyvinylidene Fluoride) (Current Page) | A-Excellent | Safe for Continuous Industrial Service | -40°F to 280°F (-40°C to 138°C) |
| Buna-N (Nitrile / NBR Elastomer) | B-Good | Acceptable with Operating Controls | -40°F to 250°F (-40°C to 121°C) |
| HDPE (High-Density Polyethylene) | A-Excellent | Safe for Continuous Industrial Service | -60°F to 140°F (-51°C to 60°C) |
Frequently Asked Questions (FAQ)
Is PVDF compatible with Uric Acid?
PVDF is rated A-Excellent (Safe for Continuous Industrial Service) with Uric Acid (Formula: C5H4N4O3, CAS: 69-93-2). Chemically inert interface with no measurable corrosion, polymer chain scission, or elastomeric swell under standard operating conditions. Approved for continuous fluid handling, bulk storage, valves, and sealing assemblies.
What is the best alternative material for handling Uric Acid?
If PVDF does not meet your temperature or pressure requirements for Uric Acid, the highest-rated Grade A alternatives are Polypropylene, Viton, PTFE, PVC. Always verify O-ring elastomers and metallic fasteners separately before full-scale deployment.
Technical Engineering FAQs: Uric Acid vs PVDF
Click any question below for chemical failure-mode specifics, thermal derating limits, and material selection rules: